Car Tire Inflator Portable 12V Air Compressor with Digital

Car Tire Inflator Portable 12V Air Compressor with Digital Description

150PSI Tire Inflator Portable A ir Compressor inflations pump For Car Tires 12V Auto Tire Pump With Digital Pressure Gauge With Emergency LED Light Product parameters： Product type: Vehicle mounted inflations pump Material: Plastic, alloy Product color:Black Product size: 13.2x5.3x20.3cm/5.2x2.1x8.0in Packing size:21x15.5x6.5cm/8.3x6.1x2.6in Gross weight: 480g/1.1lb Rated voltage: DC12 (V) Power line length: 3 metres Length of gas pipe: About 0.37m A ir volume: 45L/min Piston diameter: 19mm Maximum A ir pressure: pressure: 0-150psi Product description: This cylinder car mounted inflations pump is applicable to 12V car tires, motorcycles, bicycles, balls, rubber boats, beach floating beds, inflatable toys, etc. It is convenient to carry and powerful in performance. Professionals and stable inflations pump, 30s fast inflations, refused to wait, stopped when filling, easy to operate, girls can also easily use. This inflations pump uses a high-density sensing chip, which can accurately sense the tire pressure, give you the tire pressure value in time and accurately, and ensure travel safe The charging pump is designed with a metal cylinder and equipped with a permanent magnet motor, which can fully ensure the quality and performance during use. The button type interface design can be Flattened at one time, no need to tighten the screws, no damage to your car, and the copper coil motor is not hot and has low noise. Precautions: It is not allowed to inflate the tires of large and overweight vehicles, such as trucks, trucks, container trucks, etc When inflating, please stop the machine for 10 minutes for cool later 10 minutes of continuous to guard against damage to the A ir pump and accessories, and prolong the life of the motor. When the rubber-boats is inflated, it can work continuously for 30 minutes Generally, the normal tire pressure of 30PSI can be reached in 3-5 minutes when the tire is inflated, and it will take a little longer for large tires; If the pointer of the instrument rises rapidly to 50-100PSI at the beginning of inflations, it means that the a ir is blocked and the a ir does not enter the tire. At this time, it is necessary to immediately pull off the A ir nozzle connector and re operate, otherwise the motor and instrument are easy to be damaged People shall not leave the body when using, and shall follow with interest the tire pressure at any time, and shall not be too saturated The a ir pump plug is equipped with a fused. If the a ir pump does not start, please open the plug to check and replace it (the fused is 10A) The pressure required for each type of tire is different. Please refer to the label on the side of the car tire or ask the car manufacture Package Included: 1x Host. 1x A ir nozzle. 1x Power cord