Carbon Steel Rivet Nut Tool Kit Mandrel Set for M3-M10 Hardware Rivets and Nuts

Carbon Steel Rivet Nut Tool Kit Mandrel Set for M3-M10 Hardware Rivets and Nuts Description

What Is In This Set: six threaded nosepieces in M3, M4, M5, M6, M8 and M10, machined from high-carbon chromium bearing steel. A nosepiece (the front guide that locates the rivet nut) and a mandrel (the pull rod) are separate wear parts: this set contains [fill in: which, and how many of each].
Six Sizes, One Case: M3 for instrument panels and thin brackets, M4 and M5 for sheet metal brackets and electrical enclosures, M6 for automotive trim and body panels, M8 and M10 for chassis brackets and trailer hardware. You change a nosepiece in seconds instead of running back to the bench for a second setup.
Check Your Tool Before You Buy: these nosepieces thread into rivet nut setters that accept a screw-in nose of matching size, across manual hand riveters, drill-drive adapters and pneumatic riveting tools. Fitment depends your tool's thread and stroke, not just the rivet nut size.
Where It Earns Its Keep: adding a threaded point where there is none, such as car body panels, RV and trailer brackets, HVAC ducting, electrical enclosures, fencing and sheet metal guards. Blind side access is the real reason you need it: no rear access, no tapping, no weld nut, and no burning a hole through thin gauge stock.
Fitted By Hand, No Shimming: the nosepiece threads straight into the tool body and seats with hand pressure, so you can sizes at the bench without re-setting stroke length. A dual bearing washer behind the nose takes the rotation load off the threads, which is where cheaper noses gall and seize after a few hundred rivets.

Color: As Shown
Material: Carbon Steel

Package Contents:
1*Rivet Nut Tool Kit