For H4 4 Inch Vector Network Analyzer HF VHF UHF Antenna Analyzer

For H4 4 Inch Vector Network Analyzer HF VHF UHF Antenna Analyzer Description

Number of calibration points: Maximum 401 (optional), unlimited connection to PC
Scan point speed: 600 p/s ( = 4000Hz)
Measurement of S-parameters, VSWR, phase, delay, chart, time domain analysis...
Interface: USB type-C Communication Mode: CDC (serial)

ABS housing: 75mmx133mmx18mm (excluding protrusions)
Measurement frequency: 10KHz- 1.5GHz
output: O0dBm (2dB, fundamental)
Frequency accuracy:Less than 2ppm
Frequency stability:Less than 0.5ppm
Measurement range: 70dB (50kHz-300MHz), (60dB (300M-900MHz), 40dB (0.9G-1.5GHz)
(When using harmonic measurements, it is necessary to pay attention to the errors caused by the fundamental nonlinear transformation)
Port SWR:Less than 1.1
Display: 3.95Inch TFT (320 x 480)
USB interface: USB type-C communication mode: CDC (serial)
Power supply: USB 5V 220mA, built-in 2000mAh battery, maximum charging current 1A
The product appearance and printed words depending on the batch, but this does not affect use.
Colour:As Shown
Material:ABS

Package Contents:
1set * vector network analyzer with accessories
1 * English instruction manual

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.