For- XJ 2013-2015 Front Headlight Shell Headlight Rear Lamp Light Box Xenon Headlights Rear Shell Right

For- XJ 2013-2015 Front Headlight Shell Headlight Rear Lamp Light Box Xenon Headlights Rear Shell Right Description

The car mold.Antioxidant.High temperature resistance.Highly transparent. Easy to install.Product name: For XJ 2013-2015 headlight rear shell (light box). Production process: PC hardening high temperature injection molding. Applicable models: FOR XJ 2013-2015. High-end craftsmanship. quality assurance.
Install:1. If you have a better oven.Just remove the back cover of the lamp and bulb.Put it in the oven and heat it to 80 degrees Celsius for 10 minutes to soften the glue. The lamp is separated from the lamp housing.
2: If you don't have an oven. You must use a heat gun. This will heat the sharpest corners of the headlights for a while. with Insert the screwdriver after the glue has softened. (Note: Do not use too many forums to avoid damage. When preparing gloves Touch. It's still a bit hot. Stop heating. Make sure the temperature is not too high to avoid damage
3: After heating for a long , quickly open the corner and don't forget to wear gloves (gloves should be clean. Cannot be discarded)
4: Everything goes well. higher efficiency. One room has heating. One minute is enough. If it doesn't go well. Continue one Heat a single part with a heat gun. The glue is very soft. Separate quickly.

5: After separation. try your best. Clean the glue in the glue tank. Put gloves and start installing the new bulb
6: Apply glue the fuel tank with glue. Glue should be properly maintained. About 2/3
7: Install a new lampshade. A small amount of glue will overflow during installation. Can't deal with it first. After gluing drought. Handle the blade. The auricle glue and friction surface are made of cloth. At the end of the assembly, we need to air dry for 3-5 days, and we need a few days. Reload the car. And it can't be washed for a week, and it can't rain.
Colour:black
Material:PC

Package Contents: