Heavy Duty L Hook Screws Zinc Plated Steel Screw In Wood Hooks Square Cup Hook Wall Hangers

Heavy Duty L Hook Screws Zinc Plated Steel Screw In Wood Hooks Square Cup Hook Wall Hangers Description

These Heavy Duty Metal L-Hook Screws are a simple, robust screw-in hanging point for wood and timber surfaces, indoors and outdoors. Each hook is formed from a single length of hardwearing steel wire, bent into a right-angle (L) profile, with a sharp wood screw thread on the fixing end. That single-piece construction is the hook's defining feature: there's no separate screw, plate or fixing to lose or line up - the hook itself is the fastener, giving a largely tool-free installation and a strong, open hook face that keeps hold of whatever you hang from it. The diameter quoted for each size is measured on the threaded (screw-in) part of the hook, so it lines up directly with the timber and pilot hole you're fixing into.

What sets an open L-hook apart from a closed cup hook or screw eye is the hook face itself: because it's open rather than closed, loads can be hung and lifted off again in a moment, without having to thread anything over the end first. That makes it equally suited to a quick, regularly-used hanging point for things you move around - tools, cables, hosepipes, buckets, seasonal lighting - and to a fixed, permanent fitting wherever a simple, visible hook is wanted, from a shed or workshop wall to a garden fence or ceiling joist. Each hook carries a white zinc-plated coating over the steel body, giving a bright finish that suits indoor use as well as covered or sheltered spots outdoors.

These L-hook screws are available in four sizes, from 35mm (1.4") up to 60mm (2.4") in overall length, with the wire/shank diameter increasing alongside the length so the larger sizes carry proportionately more strength. Full dimensions, diameters and weights for each size are set out in the Specification section below, so you can match the right size to the load and surface you're working with.

Key Features

• Single-piece steel wire construction - the L-shaped hook body and the wood screw thread are formed from one length of wire, with no separate fixing to lose
• Open L-shaped hook face, rather than a closed cup or eye, so loads can be hung and lifted off again quickly without threading anything over the hook first
• Sharp, coarse wood screw thread on the fixing end bites directly into timber and can usually be driven by hand, or with pliers or a screwdriver bar through the shank
• White zinc-plated finish over the steel body gives a bright, corrosion-resistant surface suited to indoor use and covered or sheltered outdoor locations
• Four sizes, from 35mm (1.4") to 60mm (2.4") overall length, with wire/shank diameter increasing alongside length for greater strength on the larger sizes
• Diameter is measured on the threaded (screw-in) part of the hook, so it can be matched directly to the timber you're fixing into
• Suits both temporary, regularly-moved loads and permanent, fixed hanging points, indoors or outdoors
• Steel construction throughout for a durable, long-lasting hook

Specification

• Size (L x d) 35 x 3.5mm - Overall length (L): 35mm (1.38"); Wire/shank diameter (d): 3.5mm (0.14"); Finish: White zinc-plated; Weight per hook: 2g (0.07oz)
• Size (L x d) 45 x 4.0mm - Overall length (L): 45mm (1.77"); Wire/shank diameter (d): 4.0mm (0.16"); Finish: White zinc-plated; Weight per hook: 4g (0.14oz)
• Size (L x d) 50 x 5.0mm - Overall length (L): 50mm (1.97"); Wire/shank diameter (d): 5.0mm (0.20"); Finish: White zinc-plated; Weight per hook: 6g (0.21oz)
• Size (L x d) 60 x 6.0mm - Overall length (L): 60mm (2.36"); Wire/shank diameter (d): 6.0mm (0.24"); Finish: White zinc-plated; Weight per hook: 10g (0.35oz)

Typical Applications

The open hook face makes these L-hook screws especially useful anywhere you need to hang and unhook items regularly, rather than leave something permanently threaded on:

• Sheds, garages and workshops - hang hand tools, extension leads, hosepipes, coiled cable or buckets where they're needed, and lift them straight off again without unthreading anything
• Garden fences, pergolas and outbuildings - fixed hanging points for garden tools, hanging baskets or coiled hose, with the white zinc-plated finish suited to covered or sheltered spots outdoors
• Ceiling joists and rafters - overhead hanging points for ladders, bikes or seasonal decorations; a smaller size suits lighter items, with a larger size where more strength is needed
• Kitchen and utility rooms - rail- or joist-mounted hooks for utensils, cloths or equipment that gets lifted on and off through the day
• Seasonal and temporary fittings - putting up and taking down string lights, bunting or festive decorations, where the open hook profile makes both fitting and removal quick

Because the wire diameter increases with each size, it's worth matching the hook to the job: the smaller 35mm and 45mm sizes suit lighter, everyday items, while the 50mm and 60mm sizes are better suited to heavier tools and equipment.

Installation Guidance

Installation is straightforward, and in most cases needs no more than the hook itself. The coarse wood screw thread bites directly into timber, so the hook can usually be driven in by hand, or with pliers or a screwdriver bar passed through the shank for extra leverage, without pre-drilling in most softwoods. In hardwood or denser timber, drill a small pilot hole first - this makes the hook easier to drive home and helps avoid splitting the wood, particularly with the larger, thicker-shanked sizes. Drive the hook in until it sits flush against the timber surface, and orient the open face in the direction the load will hang so it's supported correctly and won't slip off sideways.