Hgbd-metal Car Dent Repair Tools Dent Puller Auto Body Dents Suction Cup T-puller + 18 Spacers

Hgbd-metal Car Dent Repair Tools Dent Puller Auto Body Dents Suction Cup T-puller + 18 Spacers Description

Metal Car Dent Repair Tools Dent Puller Auto Body Dents Suction Cup Tee Puller + 18 Spacers Features: It is made of metal for high strength and long service life. A necessary component for dent repair, direct replacement for the broken one. Easy installation, the thread size is M10 for better application. Specification: Material: Metal Color: As picture show Type: M10 Size: As picture show Package included: T-puller + 18 spacers How to use this paintless dent repair kits: 1. Clean the dent with a clean, damp cloth 2. Mount the glue stick into the glue gun, press the trigger to let the glue stick into the glue gun, connect the power source and preheat for 5 minutes 3. Use a appropriate drawing seal. A large bump requires a large drawing seal. (Note: the larger the drawing gasket, the greater the drawing force) 4. Pull the trigger and apply the drawing gasket with extruded glue (the 4 holes of the gasket should be applied with hot melt glue ) 5. Quickly place the drawing seal with hot melt glue in the center of the dent, press lightly until the glue hardens and adheres (Allow the glue to cool for about 8 minutes. Cooling time should be less than 10 minutes and should be slightly shorter in winter) 6. Align the T-shaped repairer and press the drawing joint with hot melt glue, pull the sliding rod back to raise the dent 7. Check with a Line card. If the dent still exists, tap it lightly with a hammer or flattening pen 8. Clean the repaired area with a clean, damp cloth