jixopn M.2 SATA Adapter Card for Win7 Win8 WinXP to SATA3 Computer Disk Converter

jixopn M.2 SATA Adapter Card for Win7 Win8 WinXP to SATA3 Computer Disk Converter Description

M.2 M2.SSD SATA Adapter NGFF to SATA3 Card 22PIN Computer PC Disk Converter for Win7 Win8 Mac WinXP Notebook Accessory Feature: 1. Transfer the M.2 hard disk defined by the KEY-B-M SATA of the motherboard to the SATA 22PIN interface. This adapter only connects the signal from the M.2 hard disk to the SATA 22PIN connector, so the adapter card does not need to be driven. If you don't recognize the hard disk, please check whether it is an M.2 interface. The card basically won't fail. Please know. 2. SATA standard M2.SSD is supported, but the old NVME M2.SSD is not supported. 3. This card is suitable for 4 different SSD hard disk lengths, 3cm, 4.2cm, 6cm, 8cm and other different M2 (NGFF)SSD hard disk lengths. Adopt ceramic filter capacitor and high power LDO voltage control chip, with stable performance. 4. The adapter card only changes the interface form of the solid-state hard disk, but does not change any performance of your hard disk. What are your original hard disk parameters? With the adapter card, the output interface performance will not change. Specification: Length: supports full height Color: Black PCB Interface: M2 SSD to standard SATA 22PIN Supporting system: Win 2000/Win XP/2003/Vista/2008/Win 7/Win 8 32/64 bit/for MAC/Linux Dimension: 100*72*10mm/3.9X2.8X0.39in Note: M.2 is only suitable for SSD defined by SATA! The adapter can only be used for the hard disk defined by M.2KEYB- M SATAS, and cannot be used for the hard disk with PCI-E signal. Make sure slot type when purchasing. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Included: 1 X M2 SATA Adapter 1. Transfer the M.2 hard disk defined by the KEY-B-M SATA of the motherboard to the SATA 22PIN interface. This adapter only connects the signal from the M.2 hard disk to the SATA 22PIN connector, so the adapter card does not need to be driven. If you don't recognize the hard disk, please check whether it is an M.2 interface. The card basically won't fail. Please know. 2. SATA standard M2.SSD is supported, but the old NVME M2.SSD is not supported. 3. This card is suitable for 4 different SSD hard disk lengths, 3cm, 4.2cm, 6cm, 8cm and other different M2 (NGFF)SSD hard disk lengths. Adopt ceramic filter capacitor and high power LDO voltage control chip, with stable performance. 4. The adapter card only changes the interface form of the solid-state hard disk, but does not change any performance of your hard disk. What are your original hard disk parameters? With the adapter card, the output interface performance will not change.