KH140F Bluetooth Battery Monitor 0-120V 400A Voltage Current Tester

KH140F Bluetooth Battery Monitor 0-120V 400A Voltage Current Tester Description

Measuring voltage 0-120V,measuring capacity 0~9999.99AH;
Applicable to various batteries, such as ternary lithium batteries, lead-acid batteries, lithium iron phosphate batteries, etc.;
2.4-inch high-definition color display, silicone buttons;
The sampler is equipped with a shell, which is easy to install and provides insulation protection;
The shunt is made of pure copper material, which has good conductivity and not consume too much battery power in standby mode;

It can automatically identifycharging and discharging, the charging capacity increases, the discharging capacity decreases, remaining capacity is displayed in real time;
It supports setting two different screen brightnesses during the day and night, and can freely switch between three off-screen modes.
Overvoltage, undervoltage, overcurrent, overpower, external overheating, low temperature protection can be set. When the protection condition is reached, there be an alarm sound and a -up window reminder, and the relay disconnect the circuit (the delivery list does not include the relay);
Provide mobile APP, support Android and mobile phones to view data through Bluetooth, view charge and discharge curves, and support historical data export;
Provide communication protocol, use 485 communication to control the instrument;
Voltage measurement range: 0-120V
Voltage resolution: 0.01V
Temperature measurement range: -20-120
Ampere-hour measurement range: 0~9999.99AH
Watt-hour measurement range: 0~9999.99kWH
Bluetooth communication distance: Up to 10 meters (No obstacle)
Voltage accuracy: 1%+2 digits
Sampling rate: 1 time/second
Colour:As Shown
Material:plastic+metal
Current measurement range: 0~400A
type:KH140F

Package Contents:
1 x Coulomb Counter Kit

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.