Lamp Operation Controller Manual Light Remote Control For RC Car

Lamp Operation Controller Manual Light Remote Control For RC Car Description

Features:
1. Used to control light for modify the simulation light system of remote control vehicle.
2. It is more fast and convenient with the RF remote control.
3. Multi modes for you to choose.
4. With built-in battery, practical and money saving.
5. Nice accessory for model car light system.
Installation Method:
1. Power supply
The machine can accept DC12V to 24V power supply. The red cable shall be connected to the positive pole and the black cable to the negative pole. Please select the appropriate power supply according to the LED
2. The LED output
The peak output current is 6A. If the main engine overheats, please reduce the load.
3. The Remote Controll
Please pull out the insulation parts before use. RF wireless remote control signals can pass through the barrier without aiming at the host during operation. In order to receive the remote control signal correctly, do not install the main machine in the closed metal parts. Temote battery is 3V CR2025 type, please replace the same type of battery only.
Specification:
Dynamic Pattern: 8 Model
Dynamic Speed Grade: 10 Grade
Illuminance: 10 Grade
PWM Grade: 256 Grade
Smooth Dimming Effect: Yes
Working Voltage: DC12-24V
Output Current: Peak 6A
Remote Control Mode: RF Wireless
Remote Control Frequency: 433.92MHz
Remote Control Distance: Open Area > 30M
Remote Control Battery: Built-in Button Battery
Weight: Approx. 23g
Package List:
1 * LED Controller
1 * Remote Control