LED Capacitive Touch Dimmer Module 5-24V 3A

LED Capacitive Touch Dimmer Module 5-24V 3A Description

Features: - brand new and high quality - Made of high quality materials, durable and practical - Function Mode Selection: Default is Mode 1: - That is, the pads 123 are not soldered, OPT1 OPT2O PT3 is: 111 - do not solder - 1 for soldering to 0 - Mode OPT1 0PT2 OPT3 Dimming method - The default is high level 1 when the pad is floating, and low level 0 when the pad is shorted; - Brightness memory does not refer to power-off memory, it means that after the module is powered on, the touch switch process has brightness memory; when the module is powered off, the brightness will return to the default state: - Application scenarios: wardrobe cabinet lights, display cabinet lights, LED hard light strips, light strips, aluminum trough lights, touch eye protection table lamps, etc. (Material for panels: insulating materials, , ordinary glass, tempered glass, plastic, wood, paper, stone, etc.) Product parameters: - Input voltage DC5V-24V (recommended 12V) output voltage equal to input voltage - Load power 72W(MAX) - Load current resistive 3A(MAX) - Standby current 10-15mA - Standby power consumption ~0.01W - Working temperature -25C-85C - Output frequency 32KHZ - Product weight 15g - Product size: length 42 width 12 height 14 (MM) Kind tips: - The input voltage cannot be lower than 5V or higher than 24V, 12V is the best. - The load power cannot be higher than 72W, otherwise there will be induction and the load will not act. - Do not reverse the input and output, IN is input, OUT is output, otherwise it will burn out the circuit. Package Included: 1* LED Capacitor Module Touch Switch Notes: 1. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture. 2. Please allow a slight deviation between the data and the manual measurement.