M5Stack ESP32 Core Ink Development Kit with 1.54'' EInk Display IoT Terminal E-Book Industrial Control Panel

M5Stack ESP32 Core Ink Development Kit with 1.54'' EInk Display IoT Terminal E-Book Industrial Control Panel Description

view the corresponding tutorial&quick-Start. Click here to open Description: CoreInk is a brand new E-ink display in the M5Stack cores range. Controlled by the ESP32-PICO-D4 This new device includes a 200x200 1.54' Black and White E-Ink Display. Compared to a regular LCDï¼E-ink displays are easier on the eyes, which makes them a great choice for reading or viewing for longer periods. Other benefits are the low power consumption and the ability to retain the image even if power to the display is terminatedãFor control the CoreInk integrates an multi-function button,A physical button, integrated status LED and buzzer.The device also includes a 390mAh Lipoï¼RTC(BM8563)for controlling accurate timing and deep sleep funcionality. CoreInk features independent reset and power buttonsï¼expansion ports(HY2.0-4Pï¼M-BUSï¼HAT expansion)for attaching external sensors to expand functionailtyï¼for unlimited possibilitiesã Warning : Please avoid using high refresh ratesï¼reccommended refresh rate is(15s/per refresh), Do not expose to ultraviolet rays for a long time, otherwise it may cause irreversible damage to the ink screen. Features: ESP32 Standard wireless functions WiFi,Bluetooth Internal 4M Flash Low Power Display 180 degree viewing angle Expansion ports Built-in Magnet Internal Battery Expandable Package Included: 1x CoreInk 1x Type-C USB(20cm) Application IoT Terminal E-Book Industrial Control Panel Electronic Tag Specification: Resource Parameter ESP32-PICO-D4 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth Flash 4MB Flash Input Voltage 5V @ 500mA Ports TypeC*1, HY2.0-4P*1 , M-BUS Female Connectorï¼Pin Array/ Hat Expansion Screen GDEW0154M09 | SPI Port | 200*[email protected]' | Dpi:184 | 1-bit Black & White(Grayscaleï¼2) | Viewing Area(mm)ï¼27.6x27.6 | Dot pitch(mm) 0.138x0.138 | Refresh Timeï¼sï¼ 0.82 /Partial refreshï¼sï¼ 0.24 Physical Buttons Programmable *1 ï¼ Reset *1ï¼ Power *1 LED Green LED x 1 RTC BM8563 Buzzer Passive Buzzer*1 Wifi 2.4G 3D Antenna PINS G25, G26, G36, G23, G34, G18, G21, G22, G14, G13 Battery [email protected] Working Temp 32ÂF to 104ÂF ( 0ÂC to 40ÂC ) Net Weight 32g Gross Weight 55g Dimensions 56*40*16mm Package Size 82*46*20mm Case Material Plastic ( PC ) EasyLoader: EasyLoader is a concise and fast program writer, which has a built-in case program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host Please click here to view the CP210X driver installation tutorial , M5StickC/V/T/ATOM series can be used without driver) Pin Mapping E-Ink Display Screen Resolutionï¼200x200 ESP32 Chip GPIO4 GPIO0 GPIO15 GPIO9 GPIO18 GPIO23 GDEW0154M09 BUSY RST D/C CS SCK MOS1 Multi-function button & Physical Button & LED & Buzzer ESP32 Chip GPIO37 GPIO38 GPIO39 GPIO5 GPIO10 GPIO2 Multi-function button Left position Button press Right position / / / Physical Button / / / Physical Button / / LED / / / / LED / Buzzer / / / / / Buzzer USB Serial ESP32 Chip GPIO1 GPIO3 CP2104 RXD TXD Internal I2C Connection ESP32 Chip GPIO21 GPIO22 BM8563 SDA SCL Coreink-HY2.0 4P Port PORT PIN Protocol: EXT-PORT G32/33 I2C ESP32 ADC/DAC Mappable Pins ADC1 ADC2 DAC1 DAC2 8 Channel 10 Channel 2 Channel 2 Channel G32-39 G0/2/4/12-15/25-27 G25 G26 For more info on specific pin functions refer to the official ESP32 Docs ESP32 datasheet Related Link datasheet ESP32 BM8563 SY7088 GDEW0154M09 API Arduin API Example Arduin IDE Github Lib & Example Schematic: Click here to open