![2 pin DIN Plug Speaker and HiFi Connector Screw Terminals Strain End [1 Pack]](https://cdn.onbuy.com/product/a13ef6839758468d8fff3c631612d59b/500-500/p5w2jxn.jpg)
![2 pin DIN Plug Speaker and HiFi Connector Screw Terminals Strain Ends [2 Pack]](https://cdn.onbuy.com/product/65aa11ed4914c/500-500/p5w2k8h.jpg)
Product Images
Sorry, this item is temporarily out of stock.
MCP23017 I/O Expansion Module Compatible for Raspberry Pi/Micro-Bit/STM32/Compatible with for
Brand Typecat
New
Similar Products we think you'll like
Would you like us to let you know when it's back?
Description & Details
Summary
- One minute self introduction:I am an I/O expansion module based on I2C interface control, which can expand up to 16 V/O ports and support the simultaneous use of up to 8 expansion modules, up to 128 I/O ports. It is compatible with 3.3V and 5V levels
- 12C interface control, only 2 signal lines are needed to expand 16 I/O ports The I2C communication address can be set, and the communication address can be modified by short circuiting A0/A1/A2 solder joints. It provides two interface types: PH2.0 terminal and solder pad, and supports parallel connection of multiple I2C modules. Onboard level conversion circuit, compatible with operating levels of 3.3V/5V
- I/O expansion module
- For Micro: bit
- For STM32/compatible with for Arduino
MCP23017 I/O Expansion Module Compatible for Raspberry Pi/Micro-Bit/STM32/Compatible with for Description
One minute self introduction:I am an I/O expansion module based I2C interface control, which can expand to 16 V/O and support the simultaneous use of to 8 expansion modules, to 128 I/O . It is compatible with 3.3V and 5V levels
12C interface control, only 2 signal lines are needed to expand 16 I/O The I2C communication address can be set, and the communication address can be modified by short circuiting A0/A1/A2 solder joints. It provides two interface types: PH2.0 terminal and solder pad, and supports parallel connection of multiple I2C modules. Onboard level conversion circuit, compatible with operating levels of 3.3V/5V
Working voltage: 5V/3.3V
Control interface: 12C
Product size: 38mm x 23mm
Via diameter: 2.0mm
Colour:As Shown
Material:PC
Due to different product batches, the appearance may vary, which does not affect the use
Package Contents:
1 * expansion module
1 * cable
Details
| OPC | PVNNRP2 |
|---|---|
| Brand | Typecat |
| Codes | 6031418835162 (EAN) |
Product Data
| Height | 4cm |
|---|---|
| Width | 9cm |
| Length | 14cm |
| Weight | 0.03kg |
| Colour | As Shown |
| Material | PC |
Would you like us to let you know when it's back?
MCP23017 I/O Expansion Module Compatible for Raspberry Pi/Micro-Bit/STM32/Compatible with for
New
You might also like