Microwave Radio Double Balanced RF Mixer Frequency Transducer

Microwave Radio Double Balanced RF Mixer Frequency Transducer Description

1. RF microwave receiver down conversion
2. Internal dual balanced microwave diode composition, high reliability
3. High conversion efficiency: 8.5dB loss
4. High isolation between local oscillator and RF input: 25dB

Technical indicators:
1. Power supply: passive mixer (no power supply required)
2. RF input: 4.5-9.0GHz
3. IF output: DC-2.5GHz
4. Frequency conversion loss: 8.5dB
5. Noise figure: 8.5dB (SSB)
6. Local oscillator input: 13dBm
7. Port isolation:
Local oscillator to RF: 25dB (typical)
Local oscillator to IF: 25dB (typical)
8. High input 1P3: 21dBm
9. High input P1dB: 10dBm
10. Connector type: standard SMA female (external screw and internal hole)
Usage:
1. RF input: RFin port
2. Local oscillator input: LOin port (recommended signal strength +13dBm)
3. Intermediate frequency output: IFout port
4. Power supply: This inverter is a passive device and does not require power supply
Absolute maximum value (may cause physical damage to the device and cannot be restored):
Maximum input value of RF local oscillator: 13dBm
Maximum input of local oscillator: 27dBm (0.5W)
Note:
Installation guide not included, we strongly recommend you seek professional installation.
Please check as much as possible to make sure the item is what you need.
Tips:The product may be updated constantly,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use.
Colour:As Shown
Material:PCB

Package Contents:
1 * RF Mixer Module

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.