Salt Chlorinator for Swimming Pools & Spas, 100-240V

Salt Chlorinator for Swimming Pools & Spas, 100-240V Description

Item Type: Salt Chlorinator Material: Plastic Size of Unassembled Accessories: 143.5x124.3mm / 5.6x4.9in Circular Joint Size: Outer diameter: 57mm / 2.2in, inner diameter: 50mm / 2.0in Nipple Connector Size: 32mm / 1.3in, 38mm / 1.5in Rated Voltage: 100-240v Voltage Frequency: 50/60Hz Salt Level: 2700-4500ppm Water Temperature: 10-45C Application: Salt and chlorine cleaning for swimming pools, spa pools, SPASWIM, swimming tanks, pools, etc. Instructions: 1. Before use, it must be ensured that the diameter of the pipe to be installed is the same as the installation diameter of the salt chlorinator generator. The salt chlorinator generator is equipped with two kinds of live connections. 2. Before installation, it must be confirmed that the valve of the pipeline where the product is to be installed is closed. 3. Before installation, clean the oil or sundries in the installation nozzle and the matching union nozzle. 4. The salt chlorinator should be installed on the pipeline before returning to the swimming pool in the water treatment process, and it should be installed on the bypass pipeline. An adjustable valve must be installed on the main line5. Before installing the salt chlorinator, observe whether the direction of the water flow is consistent with the direction of the arrow marked on the shell of the salt chlorinator. It must be ensured that the direction of the water flow is consistent with the direction of the arrow marked on the shell of the salt chlorinator, otherwise the salt chlorinator will not work. 6. When connecting the installation nozzle and the flexible nozzle, the PVC special glue should be used for connecting the hard pipe, and the special locking hoop should be used for connecting the hose, and no glue is required. 7. The salt chlorinator is required to be installed in a well ventilated location, which is conducive to the heat dissipation of the electrical controls. 8. The power input of the salt chlorinator needs to be installed on a power supply with leakage switch protection (100-220V, 50 60Hz). It is recommended that this power supply and the water pump power supply be the same power supply. .wang-edit-text{ font-family: 'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px5px; } .wang-edit-text table th { text-align: center; }