Water pH and Chlorine Tester for Pool and Spa 2-Pack

Water pH and Chlorine Tester for Pool and Spa 2-Pack Description

Fast accurate: The meter can quickly and accurately obtain results without using color charts or messy test strips. It has a resolution of 0.01, an accuracy of 0.05, can be fully measured in the pH range of 0 to 14, and the pH meter has been calibrated at the factory. Chlorine content in the safe measurement range: 1.2-1.7 ppm, pH in the safe measurement range: 7.2-7.8. Miniature convenient: Hand-held pen type and compact suitcase can be put in a pocket or bag, and can be carried anywhere. Because the pH meter has built-in () automatic temperature compensation, it no longer needs to take care of the temperature of the test liquid, so it can accurately determine the pH of the sample at any temperature within the range of 0 C-80 C (32 F-176 F), very convenient. Practical safety: Chlorine content recommended in swimming pools and spas: The pH value of swimming pools and spas is 1.2 to 1.7 ppm and PH is 7.2 to 7.8ph. The water quality digital monitor is an indispensable tool for quickly and accurately reading ph and chlorine, which can that your swimming pool / spa water is safe, comfortable and non-corrosive. Application widely: This PH meter is very suitable for various tasks, such as swimming pool, tap water, home brewing, laboratory testing, aquarium maintenance and so on. Electric tester for testing pH and chlorine (Cl2) levels in water. It is used to routinely monitor the pH and chlorine content of swimming pools, spas and different water sources. Test pH: The recommended chlorine content for swimming pool water or hot spring water is 7.2 to 7.8. A) When the probe is in the water, turn the turntable to pH until it clicks. (The battery must be removed when reading the pH). B) Wait until the pointer stops oscillating and reads the pH. C) Gently dry the test strip, insert it into the slot to the tester and store it. Material: plastic Color: White Dimensions (height x width x depth): 17.5 x 12 cm / 6.9 x 4.7 inches Cable length: 72 cm / 28.3 inches Type: Water Quality Tester Battery: 1 AA battery (Not Included) Test chlorine content: Recommended chlorine content for swimming pool or hot spring water from 1.2 to 1.7 ppm. A) Turn the pointer to the "Adjustment Point" position. B) Hold the tester with one hand, place the test stick in the other hand, and insert the metal rod into the water to make it in a black position. Wait for the pointer to stop swinging and read. C) Leave the test rod in the water and continue the pH test as instructed. Custody : 1. When not in use, turn the knob to the off position (towards PH until it cannot move). 2. in a dry place, avoid direct sunlight. 3. Never immerse the test stick in a liquid other than swimming pools and hot spring water. 4. Check the battery charge status regularly. The tester uses an "AA" 1.5V alkaline battery. Package Contents: 2 x Water Test Kits 2 x User manual Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.