Water Retaining Strip Silicone Water Barrier White 1M Long

Water Retaining Strip Silicone Water Barrier White 1M Long Description

Note: Thoroughly clean the and let it dry. This is very important. Dry for at least 24 hours without contact with water.
Healthy and environmentally friendly soft silicone material, , wear-, flexible and waterproof
You can use the cutter to cut freely, and the length is suitable for scenes.
The curved can be bent, but not right angles. When meeting corners, they can be cut according to the situation.
Waterproof strip is mainly used for the bottom of the bathroom door and kitchen countertop, the side of the pool, the side of the stove, if it is on the countertop, it is recommended to cut and splice the installation

Product description
Colors: White
Material: environmentally friendly silicone
Size: 2.5x1.5cm
length:1M
How to use:
1. Wiping off the water and dust on the ground.
2. Determining the position of the water retaining strip and mark it with a pen on the ground.
3. Remove the adhesive and install the water barrier in the marked position.
4. Seal the rubber strip at the position where the two ends of the water retaining strip are in contact with the wall.
5. Apply glue on both sides of the water stopper and apply evenly.
Notes:
1.The product is not equipped with glue. It is recommended that the customer purchase and use glass glue for reinforcement, which can last longer.

Package Contents:
1 x Water retaining strip

Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.