(0‑100pa) Wind Pressure Transmitter Red Micro Differential 24V 0-300pa

(0‑100pa) Wind Pressure Transmitter Red Micro Differential 24V 0-300pa Description

1、This product has high sensitivity and high accuracy, and strong anti-overload ability. 2、Strong anti‑interference ability, highly integrated sensor and amplifier circuit, long‑term stable and reliable. 3、Made of die‑cast aluminum alloy, the 0 point and accuracy of the circuit board do not need to be adjusted. 4、Using unique stress isolation technology, after precise temperature compensation and high stability amplification processing, the signal of the measured medium is converted into a 4-20mA output signal. 5、With strict quality control and quality assurance, high safety factor, can be used with peace of mind.
Item Type: Wind Pressure Transmitter
Material: Aluminum alloy
Measuring Medium: Non-corrosive gas
Overload Capacity: Single-ended minimum withstand voltage 4Kpa, maximum withstand voltage can not exceed 25 times the range
Measurement Accuracy: 0.2%FS
Output Signal: 4~20mA
Power Supply: DC24V
Wire Length: Approx. 50cm / 19.7in
Pagoda Mouth Diameter: Approx. 8mm / 0.3in
Temperature Drift: 0.1%FS/
Ambient Temperature: -30~+80
Environmental Humidity: 85%RH
Applicable Environment: Widely used in pressure measurement in clean rooms, boilers, dust collectors, vacuum cleaners, power plants, air conditioners, etc.Size: Approx. 60mm / 2.4in
51mm / 2in
45mm / 1.8in
20mm / 0.8in
64mm / 2.5in
4mm / 0.2in
40mm / 1.6in
35mm / 1.4in
30mm / 1.2in
10mm / 0.4in
1.5mm / 0.1in
1 x Wind Pressure Transmitter