1000 Direct Thermal Labels 76x51mm 25mm Core for Zebra

1000 Direct Thermal Labels 76x51mm 25mm Core for Zebra Description

Product Description

• ATEK 1,000 direct thermal labels: Supplied as one roll containing 1,000 white labels for shipping, barcode, warehouse, inventory and general business labelling.
• 76 x 51 mm label size: Each label measures 76 x 51 mm, commonly referred to as a 3 x 2 inch thermal label.
• 25 mm core: Supplied on a 25 mm tube core for compatible direct thermal label printers.
• Direct thermal printing: The heat-sensitive label surface allows compatible printers to produce text and barcodes without requiring ink, toner or a thermal-transfer ribbon.
• Wide Zebra compatibility: Suitable for a range of compatible Zebra direct thermal desktop printers including GK420D, GX420D, GC420D, ZD220D, ZD230D, ZD420D, ZD421D, ZD621D and compatible LP2844 configurations, provided the printer accepts 76 x 51 mm labels and a 25 mm core.
• Zebra 800283-205 reference: This label format is referenced against Zebra 800283-205. Always check your individual printer's media specifications before ordering.
• Ideal for ecommerce & dispatch: Suitable for shipping labels, barcode printing, stock identification, parcel labelling and other short-term business labelling applications.
• White printable surface: Provides clear contrast for addresses, text, numbers and barcodes when printed using a correctly configured compatible thermal printer.

Key Features

• 1,000 labels per roll.
• 76 x 51 mm individual label size.
• Approximately 3 x 2 inch label format.
• 25 mm tube core.
• Direct thermal printing technology.
• No ink required.
• No toner required.
• No thermal-transfer ribbon required.
• White printable surface.
• Roll-fed format.
• Compatible with a wide range of Zebra direct thermal desktop printers.
• Suitable for Zebra GK420D.
• Suitable for Zebra GX420D.
• Suitable for Zebra GC420D.
• Suitable for Zebra ZD220D.
• Suitable for Zebra ZD230D.
• Suitable for Zebra ZD420D.
• Suitable for Zebra ZD421D.
• Suitable for Zebra ZD621D.
• May suit compatible Zebra LP2844 configurations.
• Compatible with other direct thermal printers accepting the same media specifications.
• Suitable for barcodes and shipping information.
• Ideal for ecommerce, warehouse and fulfilment operations.

Product Specifications

• Brand: ATEK.
• Product Type: Direct thermal labels.
• Quantity: 1,000 labels.
• Number of Rolls: 1.
• Label Width: 76 mm / approximately 3 inches.
• Label Height: 51 mm / approximately 2 inches.
• Label Size: 76 x 51 mm / approximately 3 x 2 inch.
• Core Size: 25 mm.
• Printing Method: Direct thermal.
• Colour: White.
• Compatibility Reference: Zebra 800283-205.
• Compatible Printer Families: Zebra GK420D, GX420D, GC420D, ZD220D, ZD230D, ZD420D, ZD421D, ZD621D, compatible LP2844 configurations and other suitable direct thermal printers accepting the same media dimensions.
• Format: Roll-fed labels.

76 x 51 mm / 3 x 2 Inch Format

• Each individual label measures 76 mm wide by 51 mm high.
• Commonly referred to as a 76 x 51 mm thermal label.
• Approximately equivalent to the popular 3 x 2 inch format.
• Provides useful space for barcodes, addresses, product information and identification numbers.
• Check your printing template is configured to 76 x 51 mm before batch printing.

Direct Thermal Printing

• Designed specifically for compatible direct thermal printers.
• The printer's thermal print head creates the image directly on the heat-sensitive label surface.
• No separate ink cartridges are required.
• No toner cartridges are required.
• No thermal-transfer ribbon is required.
• Convenient for busy dispatch and warehouse environments where labels are printed regularly.
• Ideal for businesses that need fast, repeatable label printing without changing ink or ribbon consumables.

Ideal For

• Ecommerce dispatch.
• Shipping labels.
• Parcel identification.
• Barcode labels.
• Warehouse stock control.
• Inventory identification.
• Product labelling.
• Returns processing.
• Address labels.
• Fulfilment centres.
• Retail stock rooms.
• Marketplace sellers.
• Office and business labelling.
• Batch identification.
• Temporary warehouse location labels.

Printer Compatibility

• Zebra GK420D: Suitable for compatible GK420D direct thermal printers accepting 76 x 51 mm roll labels and the supplied core size.
• Zebra GX420D: Suitable for compatible GX420D direct thermal configurations accepting 76 x 51 mm labels.
• Zebra GC420D: Suitable for compatible GC420D direct thermal configurations accepting this label size and roll format.
• Zebra ZD220D: Suitable for compatible ZD220 direct thermal printers accepting 76 mm wide media and the supplied core configuration.
• Zebra ZD230D: Suitable for compatible ZD230 direct thermal printers accepting 76 x 51 mm labels.
• Zebra ZD420D: Suitable for compatible ZD420 direct thermal models accepting this media format.
• Zebra ZD421D: Suitable for compatible ZD421 direct thermal printers accepting the stated label dimensions and core.
• Zebra ZD621D: Suitable for compatible ZD621 direct thermal printers accepting the stated media dimensions.
• Zebra LP2844: May be suitable for compatible LP2844 direct thermal configurations accepting 76 mm wide roll labels and the supplied core size.
• Other Zebra direct thermal printers: May also be compatible where the printer accepts 76 x 51 mm die-cut direct thermal labels, a 25 mm core and the supplied roll diameter.
• Other printer brands: These labels may also work with compatible direct thermal printers from manufacturers other than Zebra where the label width, label height, core diameter, roll diameter and media sensing requirements match.
• Important: Always check your individual printer's media specifications before ordering because compatibility can vary between printer models and configurations.

Before You Buy

• Check label size: Each label measures 76 x 51 mm, approximately 3 x 2 inches.
• Check core: The roll uses a 25 mm tube core.
• Check printing technology: These are direct thermal labels and are intended for compatible direct thermal printers.
• Check printer width: Your printer must accept media at least 76 mm wide.
• Check printer settings: Your software and printer driver should be configured for 76 x 51 mm labels.
• Check media sensing: Confirm your printer is configured correctly for die-cut / gap-sensing labels where applicable.
• Zebra reference: Compatibility is referenced against Zebra 800283-205; check your individual printer before ordering.
• Universal compatibility cannot be guaranteed: Even printers from the same manufacturer can have different core, roll diameter and media requirements.

How to Use

• Step 1: Confirm your printer supports 76 x 51 mm direct thermal labels and a 25 mm core.
• Step 2: Open the printer's media compartment according to the printer manufacturer's instructions.
• Step 3: Install the roll in the correct orientation for your printer.
• Step 4: Guide the labels through the printer's media path.
• Step 5: Configure the label dimensions to 76 x 51 mm in your printer or label software.
• Step 6: Select the appropriate direct thermal media setting.
• Step 7: Set the printer sensor to the appropriate gap / die-cut label detection mode where required.
• Step 8: Print a test label and check alignment, print darkness and barcode readability.
• Step 9: Adjust printer settings if necessary before starting a large print run.

Storage & Care

• Store unused labels in a cool, dry location.
• Keep away from prolonged direct sunlight.
• Avoid excessive heat and humidity.
• Keep the printable surface away from oils, solvents and harsh chemicals.
• Store spare rolls clean and protected from dust.
• Direct thermal printing can fade when exposed to excessive heat, sunlight or certain chemicals for extended periods.
• Avoid crushing or deforming the roll during storage.
• Handle labels carefully to keep the printable surface clean.

Package Contents

• 1 x roll of ATEK direct thermal labels.
• 1,000 x individual labels per roll.
• Each label measures 76 x 51 mm / approximately 3 x 2 inches.
• 25 mm tube core.

Frequently Asked Questions

• Q: How many labels are included?
  A: One roll containing 1,000 individual labels is supplied.
• Q: What size is each label?
  A: Each label measures 76 x 51 mm, approximately 3 x 2 inches.
• Q: What is the core size?
  A: The roll is supplied on a 25 mm tube core.
• Q: Are these direct thermal labels?
  A: Yes. They are designed for direct thermal printing.
• Q: Do they require ink?
  A: No. A compatible direct thermal printer creates the image directly on the heat-sensitive label surface.
• Q: Do I need a thermal-transfer ribbon?
  A: No. These are direct thermal labels and do not require a thermal-transfer ribbon.
• Q: Are they compatible with Zebra GK420D?
  A: Yes, where the GK420D configuration accepts 76 x 51 mm direct thermal roll labels and the supplied core size.
• Q: Are they compatible with Zebra GX420D?
  A: They are suitable for compatible GX420D direct thermal configurations accepting these media dimensions.
• Q: Are they compatible with Zebra GC420D?
  A: They are suitable for compatible GC420D direct thermal configurations accepting this label size.
• Q: Are they compatible with Zebra ZD220?
  A: They may be used with compatible ZD220 direct thermal models that accept 76 x 51 mm labels and the supplied core configuration.
• Q: Are they compatible with Zebra ZD230?
  A: They may be used with compatible ZD230 direct thermal models accepting the stated label dimensions.
• Q: Are they compatible with Zebra ZD420?
  A: They may be suitable for compatible ZD420 direct thermal configurations accepting 76 x 51 mm roll media.
• Q: Are they compatible with Zebra ZD421?
  A: They may be suitable for compatible ZD421 direct thermal printers accepting the stated media size and core.
• Q: Are they compatible with Zebra ZD621?
  A: They may be suitable for compatible ZD621 direct thermal printers accepting the stated media specifications.
• Q: Are they compatible with Zebra LP2844?
  A: They may be suitable for compatible LP2844 direct thermal configurations. Check your particular printer's media specifications before ordering.
• Q: Do they fit every Zebra printer?
  A: No. Zebra manufactures printers with different media widths, core requirements and roll capacities. Always check your exact printer model before ordering.
• Q: Can they work with other printer brands?
  A: Yes, potentially. They may be suitable for other direct thermal printers that accept 76 x 51 mm labels, a 25 mm core and the supplied roll format.
• Q: Can I print barcodes on them?
  A: Yes. The white direct thermal surface is suitable for barcode printing when used with a correctly configured compatible printer.
• Q: Are they suitable for shipping labels?
  A: Yes. Their compact format makes them useful for compatible shipping, parcel identification and barcode applications.
• Q: What colour are the labels?
  A: The labels are white.
• Q: Are there 1,000 rolls?
  A: No. The listing is for one roll containing 1,000 individual labels.

Why Choose ATEK 76 x 51 mm Direct Thermal Labels?

• 1,000 labels on one roll.
• Popular 76 x 51 mm / approximately 3 x 2 inch format.
• 25 mm core.
• No ink, toner or ribbon required.
• Suitable for barcode and shipping applications.
• Useful for ecommerce and fulfilment businesses.
• Compatible with a wide range of suitable Zebra direct thermal printers.
• Suitable for GK420D, GX420D, GC420D, ZD220D, ZD230D, ZD420D, ZD421D and ZD621D configurations where media specifications match.
• May also suit compatible LP2844 and other direct thermal printers.
• White surface for clear text and barcode printing.
• Practical roll-fed format for regular business use.