100A PWM Solar Charge Controller with LCD Display and Dual USB Outputs for Street Lighting Systems

100A PWM Solar Charge Controller with LCD Display and Dual USB Outputs for Street Lighting Systems Description

100A PWM Solar Charge Controller with LCD Display and Dual USB Outputs Overview A current PWM solar charge controller designed for reliable management of solar panel systems and street lamp installations. The controller provides clear system status via an LCD screen and convenient USB power for small devices. Key benefits Reliable power management: PWM regulation ensures steady charging of batteries from solar panels, reducing charge fluctuations and extending battery service life. current capacity: 100A rating supports larger solar arrays and heavier DC loads without frequent overload. Clear system monitoring: Builtin LCD display shows realtime information so you can monitor charging current, battery status, and load conditions at a glance. Dual USB outputs: Two USB ports provide onsite DC power for phones, LED drivers, sensors, or other lowvoltage devices without needing additional converters. Practical for lighting systems: Designed to integrate with street lamp systems and other DC lighting setups to control dusktodawn operation and load switching. Function and performance PWM charge control for stable battery charging and reduced stress on battery cells. Load control suitable for lighting and DC devices, enabling scheduled or automated switching in lighting applications. 100A continuous current capacity for robust performance in medium to large offgrid systems. Compatibility Intended for use with solar panel arrays and battery storage systems in offgrid and standalone installations. Compatible with DC lighting loads such as street lamps and area lighting, and with devices that can be powered from USB outputs. Works within standard solar system configurations; consult system requirements to match battery voltage and system wiring. Physical attributes Integrated LCD display for status and configuration. Dual USB ports for auxiliary device power. Designed for panel or enclosure mounting in standard solar installations. Typical use scenarios 1) Street lighting: Control dusktodawn operation of LED street lamps while monitoring battery charge and load status through the LCD display. 2) Offgrid home or cabin: Manage charging of battery banks from solar panels and provide USB charging for phones and small electronics. 3) Remote signage or monitoring sites: Power DC lighting and local sensors while keeping the battery charged and visible system diagnostics available on the LCD. What it delivers A focused solution to manage solar charging, control lighting loads, and provide USB power in one unit. Clear system feedback through the LCD for easier setup and troubleshooting. Sufficient current capacity for demanding offgrid lighting and power scenarios. Installation notes Follow standard solar wiring practices and match the controller to system voltage and battery specifications. Ensure proper fusing and cable sizing for 100A operation to maintain system reliability. This controller is suitable for installers and system owners who need a straightforward, current PWM controller with onboard monitoring and convenient USB outputs for auxiliary power.