10K BOOST PETROL EGR VALVE CLEANER

10K BOOST PETROL EGR VALVE CLEANER Description

Product Description

10K Boost Petrol EGR Valve Cleaner is designed to remove harmful deposits that cause the valve to stick and become ineffective. Petrol EGR Valve Cleaner will clean the entire intake system restoring power and performance. Safe for use on vehicles fitted with air mass meters and catalytic converters.

Product Benefits

* Releases sticking ECR valves

* Cleans entire air intake system

* Restores power & performance

* Easy to use

* Catalytic converter safe

Directions for Use

Important - please follow closely all the instructions

1.Warm engine to normal running temperature.

2.Remove air filter from filter housing.

3.Rev engine and hold revs at 1500 rpm.

4.Making sure that the nozzle is pointing into the air intake manifold, spray using one second bursts. The engine revs will reduce during application so allow the revs to pick up between each spray burst. If required slightly increase the revs to avoid stalling.

5.Allow the engine to idle for 2 minutes, occasionally increasing the revs up to 2500 rpm.

6.Repeat the process until the entire can is used.

7.Allow the engine to idle for 5 minutes once the treatment is completed.

8.Turn off the engine and re-fit the air filter taking care as the engine will be hot.

DO NOT exceed 3000 rpm during application. Avoid contact with paintwork - in the event product does come into contact with vehicle paintwork,immediately rinse with plenty of water. Treat engine every 10,000km. For high mileage vehicles or engines with a constantly sticking EGR valve a second treatment may be required.