1200W Handheld Dustless Drywall and Plaster Sander 1200-2500r/min 220V

1200W Handheld Dustless Drywall and Plaster Sander 1200-2500r/min 220V Description

Application

It is suitable for renovators or people with high DIY ability to use it to easily sand plaster walls, putty walls, white cement walls, etc.          

How to Use

Commissioning Machine:

1. Link the machine according to the manual, plug in the power supply, and commission the machine

2. Determine the hardness and softness of the wall putty, decide which type of sandpaper to use, and choose the speed of the machine.

Sanding Operation:

1. Sanding personnel are required to put the grinding disc to the wall first, and then work on the machine.

2. When sanding the upper part of the wall, operate the machine with up and down W-shaped movement. When using the W-shape working method, pay attention to maintaining an even speed when moving up and down, and not to pause when turning, which will cause sand marks on the wall.

3. When sanding the lower part of the wall, operate the machine to move up and down sideways.

4. Sand the top of the wall choosing the shoulder type. In the process of sanding the top, pay attention to keeping the balance of the grinding disc when moving under the feet.

5. Sanding should be done in order to avoid missing.

6. When sanding, you should always pay attention to the working condition of the machine and find problems to solve in time.

7. Clean up the vacuum cleaner once every time you sand 323ft² and pour off the accumulated dust.

8. Master the sanding skills, encounter very uneven walls, repeatedly sand several times, special vulgar places need manual processing, so as to avoid machine sanding appearing through the bottom phenomenon.

9. Sanding Yang corner grinding disc can not exceed the wall 3-5CM, to avoid exceeding too much to lead to grinding disc tilt, break the corner.

10. While sanding, please do not force against the grinding disk on the wall for a long time work.

11. Clean up the sanding machine and organize other supporting facilities at the end of the day.

Specifications

Voltage: 220V

Frequency: 50Hz

Rated Power: 1200W

No-Load Speed: 1200-2500r/min

Dia. of Grinding Disc: 180mm/7in

Sandpaper: 180mm/7in

Number of Sandpapers: 6

Plug: UK  Standard

Material: Engineering Plastic

Power Source: Corded Electric

Color: Red and Black

Light: LED Strip

Power Type: Plug-in Power Supply

Type: Portable Polishing Machine

Working Principle: Disc Polisher

Power Cord Length: 2.5m/98.4in

Dust Collection Tube Length: 2m/78.7in

Auxiliary Handle Length: 12cm/4.72in

Gross Weight: 5.4kg/11.9 lbs

Net Weight: 5kg/11 lbs

Product Size: 23.3*25*30cm/9.17*9.84*11.81in

Package Size: 36*28*28cm/14.1*11*11in

Package Included

• 1*Sanding Machine
• 2*Carbon Brushes
• 1*Dust Collection Tube
• 1*Dust Collection Bag
• 6*Sandpapers
• 1*Allen Wrench
• 1*Auxiliary Handle
• 1*English Manual
• Other Accessories for Assembly

Notes

1. Beware of electrical safety hazards, please use such tools in accordance with product instructions and take the necessary personal protective measures, and place them out of the reach of children on a daily basis.

2. When sanding high walls, if an accidental drop causes the dust tube to disconnect from the black connecting clasp, simply insert the black connecting clasp into the telescopic tube first, then tighten the dust tube clockwise to the inside of the connecting clasp until it cannot be tightened.

3. Please note that this product does not support the additional installation of extension handles or folding handles.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.