1.3-3.6GHz RF VCO Demo Board Voltage Controlled Oscillator Signal Source for Radio Communication Modulation

1.3-3.6GHz RF VCO Demo Board Voltage Controlled Oscillator Signal Source for Radio Communication Modulation Description

Ultra-wide Frequency Range: Covers 1.3 GHz to 3.6 GHz; a versatile board meeting multi-band requirements.
Wide Tuning Voltage: Supports tuning voltages to 30 V (25 V recommended) for continuous wideband coverage.
Simple Power Supply: Powered via USB-C (5 V); plug-and- with no external power adapter required.
Ready-to-Test: Fully assembled and debugged; ready for immediate testing upon arrival, lowering the development barrier.
Applications RF signal sources Frequency synthesizers Wireless communication equipment testing PLL front-ends Laboratory research and education Signal generation for instrumentation

Product Overview
This demonstration board is designed around an off-the-shelf 1.3-3.6 GHz ultra-wideband VCO, enabling rapid performance evaluation. It is suitable for development applications such as RF signal sources, Phase-Locked Loops (PLLs), wireless communication equipment, and test instrumentation.
Technical Specifications
Frequency Range: 1.3 GHz - 3.6 GHz
Power Supply: USB-C (5V)
Tuning Voltage (Vt): to 30V (25V recommended)
Type: Evaluation Board / Test Board / Demonstration Board
Usage Instructions
Connect a 5V power supply via the USB-C port (a standard mobile phone charger or computer USB port is sufficient).
Apply an adjustable voltage (0-30V) to the Vt tuning terminal (it is recommended to increase the voltage gradually starting from 0V).
Connect the RF output to a spectrum analyzer or oscilloscope to monitor the output frequency.
Adjust the tuning voltage to sweep the frequency continuously within the 1.3 GHz - 3.6 GHz range.
Note: Higher tuning voltage results in higher output frequency; do not exceed 30V to avoid damaging the device.
Please check as much as possible to make sure the item is what you need.
Color: As Shown
Material: PCB