140W USB-C Fast Charging Module with PD3.1 Circuit Board for Efficient Device

140W USB-C Fast Charging Module with PD3.1 Circuit Board for Efficient Device Description

Support QC4+/PD3.0/ and other fast charging protocols, suitable for mainstream devices. Up to 140W, meet the fast charging needs of high-power devices such as laptops/mobile phones

DC6-30V input, suitable for power supply scenarios such as car/power supply
Integrated thermistor temperature protection, and equipped with an extra-large heat sink, safe and does not damage the machine
Multiple protection mechanisms input overvoltage, undervoltage protection, output overcurrent, short circuit protection, etc.
Module input method problem: This module can be understood as a charger that integrates multiple protocols, but it cannot be connected to AC power. It needs to be used with a DC power supply (power adapter). It is recommended to use a 24V DC power supply. If you need a 100W output, consider the power life at *20%, so choose a 24V5A power supply; 200W output requires a 24V10A power supply.
Input voltage:DC6-30V
Recommended input parameters: DC24V 7A
Boost and buck type: buck (input must be output 1.2V)
Input and output type: only supports output (battery power supply is not recommended)
Output interface:USB-A and USB-C
Input socket size:5.5x2.1MM (DC5521)
Size: 68*18.2*32mm
Color:As Shown
Material:PCB

Package Contents:
1 * Smart fast charging module
1*PD3.1 Charger

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.