2-in-1 Electric Nail Drill UV Light Manicure Machine

2-in-1 Electric Nail Drill UV Light Manicure Machine Description

1、UV Mode: The UV mode of the 2 in 1 electric nail drill lamp flashes twice every 30 seconds, and automatically shuts down in 2 minutes. UV curing is more convenient. 2、Compact And Portable: Exquisite and simple design, compact and portable, easy to carry when going out, and does not take up too much space. 3、Convenient Operation: The grinding head swing type design, easier grinding operation, it is very convenient to operate when nailing. 4、2 Gears Adjustments: The nail drill lamp manicure machine is set with low and high speed adjustments, and the nail polishing is equipped with fill light. 5、Detachable Multiple Polishing Heads: The detachable multiple types of polishing heads for the phototherapy nail machine can meet your different needs for different nails.
Item Type: 2 in 1 Nail Lamp Drill
Product Power: 3W
Battery Type: Lithium battery
Battery Capacity: 500mAh
Quantity Of Light Chips:
UV Light Chips: 1pcs
Fill Light: 2pcs
Product use:
1. How to disassemble and assemble the grinding head:
Disassembly method: Hold the body in one hand, and the grinding head in the other hand to go out;
Installation method: Hold the body with one hand and the grinding head with the other hand. Align the mounting post of the grinding head with the brush head hole of the main machine, and press into the main machine by aligning the rib groove.
2. When the battery power is sufficient, press the corresponding switch to start the work, and the key start function is as follows:
Polishing mode:
The first step is to press the sanding button to enter the low end mode, the sanding head will be activated at low speed, and the white light will stay on.
The second step is to press the sanding button again to enter the high end mode, the sanding head swings at a high speed, and the white light is on.
The third step, click the power button again to enter the shutdown state.
UV mode:
The first step is to press the UV button, and the UV lamp will light up.
The second step is to press the UV button again to turn off the UV lamp. (For the two working modes, only one can be activated at the same time; after one mode is turned on, press the second mode and the first mode will automatically turn off and then switch.)
3. Choose the right frosting head and gear position, hold the main unit in your hand, put the brush head close to your nails, and perform nail art with appropriate strength.
4. When using the UV function, apply UV nail polish on a single nail, place the instrument flat on the table, and illuminate the UV light transmitting area with your fingers (you can also hold the instrument with one hand during irradiation). Keep the transparent window away from direct contact. The irradiation time depends on the nail polish concentration, (recommended use time is 30 seconds to 2 minutes) for each nail in turn. When using the UV function, please use nail polish suitable for UV curing. The nail art process is the same as the daily.
5. It will automatically shut down after 15 minutes in sanding mode; it will shut down automatically after 2 minutes in UV mode.
1 x Host
2 x Grinding Head
1 x Polishing Head
1 x USB Cable
1 x Manual