2 pcs H8, H11 resistor - CAN error decoder 50W 6 Ohm 12V

2 pcs H8, H11 resistor - CAN error decoder 50W 6 Ohm 12V Description

H8, H11 resistor - CAN error decoder 50W 6 Ohm 12V

Price includes 2 pieces resistor - error decoder H8, H11

Dedicated to H8, H11, PGJ19/1, PGJ19/2 bulbs - Plug 'n Play version. Just plug into the bulb socket and attach the resistor to the metal part so that it does not break off while driving. No need to solder, etc. Quick installation, erases errors.

Resistor 50W 6 Ohm with heatsink to eliminate all problems associated with the use of LED bulbs in cars with CANBUS system. The use of resistor is often necessary even when using bulbs with CANBUS marking in cars where CAN system is particularly sensitive - such as Audi A4 B7. It is also necessary to use them in cars group VAG after 2009, Octavia 2 FL (>2009), Leon 2 (>2010), Golf6, etc.

After applying the resistor you can use cheaper LED bulbs - errors will no longer appear.

• Intended use: H8, H11 bulbs are most often used as fog lights, passing lights, driving lights

Resistor for bulbs up to 55W (it is the power of traditional bulb) in case of replacing bulbs up to 21W use 25W 6 Ohm resistor.

Mounting outside the lamp, do not cut the cables but connect one end of the resistor to the plus and the other end to the minus (we are talking about the cables supplying power to the LED bulb), as if we wanted to make a short circuit with this resistor. Resistor should be attached to a metal element so that it does not break off while driving and to have better cooling.

Each product is checked individually before shipping.

Certificates: CE