2 pieces CAN error decoder 50W 10 Ohm 12V

2 pieces CAN error decoder 50W 10 Ohm 12V Description

50W 10 Ohm resistor with a heatsink eliminating all the problems associated with the use of LED bulbs in cars with CANBUS system. The use of resistor is often necessary even when using bulbs with designation CANBUS in cars where CAN system is particularly sensitive - such as Audi A4 B7. It is also necessary to use them in cars group VAG after 2009, Octavia 2 FL (>2009), Leon 2 (>2010), Golf6, etc.

Price includes 2 pieces 50W 10 Ohm resistor + fasteners.

The resistor can be used to deceive bimetallic interrupter turn signals in older cars, eliminating the effect of rapid flashing of turn signals after changing to LED bulbs, as well as elimination of the third stop light burning after the use of LED stop / position bulbs

After applying the resistor you can use cheaper LED bulbs - the errors will no longer appear.

• Application: DRL* , blinkers, reverse lights, stop, position

Resistor for bulbs up to 55W (it is the power of a traditional bulb) when replacing bulbs up to 21W, a resistor 25W 6 Ohm should be used.

Mounting outside the lamp, do not cut the cables but connect one end of the resistor to the plus and the other end to the minus (we are talking about the cables powering the LED bulb), as if we wanted to make a short circuit with this resistor. Resistor should be attached to a metal element so that it does not break off while driving and to have better cooling.

Each product is checked individually before shipping.

Certificates: CE