2S 5A Lithium Battery Protection Board 7.2V-8.4V BMS

2S 5A Lithium Battery Protection Board 7.2V-8.4V BMS Description

1、Built-in high precision voltage detection circuit. 2、Adopt high withstand voltage terminal to be connected with the charger. 3、Built-in 3-stage overcurrent detection circuit (overcurrent 1, overcurrent 2, load short circuit). 4、Can control charge and discharge of the battery through MOS tube. 5、Wide operating temperature range -40~50, low current consumption.
Features:
Built-in high precision voltage detection circuit.
Adopt high withstand voltage terminal to be connected with the charger.
Built-in 3-stage overcurrent detection circuit (overcurrent 1, overcurrent 2, load short circuit).
Can control charge and discharge of the battery through MOS tube.
Wide operating temperature range -40~50, low current consumption.
Suitable for 2S rechargeable battery pack including Ni-Co-Mn lithium cell, Li-Co cell, Li-Mn cell, LiPo cell.
Specification:
Charging Voltage: DC 9V
Max. Continuous Discharging Current: 5A
Overcharge Detection Voltage: 4.29V0.025V
Overcharge Detection Delay:1s
Overcharge Recovery Voltage: 4.05V0.025V
Overdischarge Detection Voltage: 3V0.1V
Overdischarge Detection Delay: 128ms
Overdischarge Recovery Voltage: 3.2V0.1V
Overcurrent Detection Current: 200mA20mA
Overcurrent Detection Delay: 12ms
Overcurrent Recovery: Auto recovery
Short Circuit Detection Delay: 50μs
Short Circuit Recovery: Auto recovery
Operating Temperature: -40~50
Storage Temperature: -40~125
Package Weight: 1g
Welding Point Description:
B+: Connected to positive pole of battery
B-: Connected to negative pole of battery
MB: Connected to the connection point of battery 1 and battery 2
P+: Connected to positive pole of the charge/discharge terminal (Charge terminal and discharge is shared)
P-: Connected to negative pole of the charge/discharge terminal
Package List:
1 x Lithium Battery Protection Board