3500W Stainless Steel Electric Immersion Water Heater 220V Automatic Type

3500W Stainless Steel Electric Immersion Water Heater 220V Automatic Type Description

3500w Electric Water Heater Stainless Steel Automatic Immersion Heater 220v

Put the heater into plastic barrels, bath barrels, bathtubs, swimming pools, fish tanks, barrels, buckets and other containers filled with water. Ensure the water level allows the heater to be suspended in the water. Insert the heater when the water level is above 25 to 30 cm. The product will automatically float on the surface. Adjust the power cord to place the heater suspended in the proper position. If the water level of the container is less than 25 cm, the product cannot be suspended in the water. Ensure the heating pipe is fully submerged in water, and the heater can be used with a slight tilt. If using the heater in inflatable swimming pools, bathtubs or containers made of other materials, place a ceramic under the heat pipe to avoid direct contact between the heat pipe and the container. After putting the heater into the water-filled container, plug in the power. Wait until the heater indicator light turns on, and many small bubbles appear around the heat pipe, then the heater starts to heat. If the water volume is large, unplug the plug halfway through heating to test the water temperature. When the water temperature reaches the required temperature, unplug the plug first, wait 20 seconds before taking out the heater, then the water is ready for use.

Specifications:

Type: Electric Water Heater Parts

Model Number: Electric Water Heaters

Power: 3500W

Cable Length: 1.5m

Voltage: 220V 50HZ

Material: Stainless Steel + PP Plastic

This immersion heater is compatible with bathtubs, buckets, inflatable swimming pools etc.

When using the product, the metal heating tube must be completely in water. Do not use the water during heating. Unplug the plug before contacting the water. Do not contact the water when the product is heating. Unplug the plug before using the water. The stainless steel ball part must be fully submerged in water during heating, otherwise it will be damaged.

Package Included:

1 X Heater

The adapter will be delivered compatible with your country.