37-piece manual shaver set for the 6th Generation series

37-piece manual shaver set for the 6th Generation series Description

37-Piece Manual Razor Set for the Sixth Generation Series

Description:

Product Name: Men's Manual Razor

Product Color: As shown; Quantity: 36 blade heads, 1 blade holder

Instructions:

1. Cleanse: Before shaving, wash your face with warm water or apply a hot towel to it for a few minutes to soften beard hair and open pores. This helps reduce discomfort and skin irritation during shaving.

2. Apply Shaving Cream:

Apply an appropriate amount of shaving cream or gel evenly to the area to be shaved. Shaving cream helps lubricate the skin, reducing friction and making the shaving process smoother.

Shaving Steps

1. Hold the Razor:

Hold the razor handle firmly and comfortably. Handles are typically ergonomically designed for better control.

2. Shave in the Direction of the Hair:

Gently glide the razor from top to bottom, shaving in the direction of the hair. This reduces the risk of skin irritation and cuts.

Adjust the shaving angle based on hair direction for different facial areas, such as the cheeks, chin, and neck.

3. Gentle Operation:

Keep the razor at a 30-degree angle to the skin surface and avoid applying excessive pressure. Let the razor glide naturally across the skin surface, avoiding pressure.

Be especially gentle on sensitive areas, such as the neck and under the chin.

4. Check Your Face Frequently:

Check your shaving progress frequently during shaving to ensure you haven't missed any areas.

If there are any unshaved areas, repeat the above steps to trim them.

5. Wash Your Face:

After shaving, rinse your face with clean water to remove any remaining shaving cream and broken hairs.

Rinse your face with cool water to help close pores and reduce redness and irritation.

Blade Replacement

1. Inspecting the Blades:

Regularly inspect the blades for dullness or damage. If they are no longer sharp or rusty, replace them promptly.

2. Removing the Old Blade Head:

Depending on your shaver model, locate the blade lock. This can usually be unlocked by pressing a button or twisting the blade.

Gently pull out the old blade head, being careful not to cut your fingers.

3. Installing the New Blade Head:

Take the new blade head and align it with the handle of the shaver.

Insert the new blade head into place until you hear a "click," confirming it is properly installed. Ensure the blade head is secure and not loose. Cleaning and Maintenance

1. Cleaning the Shaver:

Rinse the shaver thoroughly with water to remove any remaining shaving cream and hair.

Some shavers come with a cleaning brush to remove fine hair and dirt from the blade head.

2.

Store in a dry place:

After cleaning, place the shaver in a well-ventilated area to air dry, or wipe it dry with a clean cloth.

Store in a dry, well-ventilated area to avoid rusting of the blades due to humidity.