3pcs Clutch Alignment Centering Control Tool

3pcs Clutch Alignment Centering Control Tool Description

3pcs Clutch Alignment Centering Control Tool Remove Install Mounting Regulator Universal



1、The clutch alignment tool can quickly and easily complete the alignment of the clutch and pressure plate before installation. 2、Allowe to manually fix (centralized) and apply the clutch plate to the pressure plate of cars and trucks during installation. 3、The clutch alignment adopts high‑quality aluminium alloy materials with durable and stable performance. 4、The operation is very simple with perfect solution to your problem, save your time and avoid frustration. 5、Small and delicate, but powerful and heavy duty. Easy to carry, not subject to the constraints of time and place.



Item Type: Clutch Alignment Tool Material: Aluminium Alloy Fitment: Universal Length of Sleeve Anchor: Approx. 5.48cm/2.2in Length of Pillar Sleeve: Approx. 12.96cm/5.1in How to Use: Step 1: Place the clutch plate above the pressure plate on the workbench, insert the tool into the center and push it down. Step 2: Compress the small wheel to expand the caliper in the clutch plate. Step 3: Squeeze the funnel wheel until it touches the pressure plate and rotate the two pressure plates. Step 4: Align the two plates by sliding sideways until the two edges are parallel, and then tighten the funnel shaft to fix the two plates together. Step 5: Install both boards on the flywheel, then loosen the small wheel to remove the tool.



2 x Sleeve Anchor 1 x Pillar Sleeve