3S 11.1V 12V 12.6V Li-ion 18650 Battery BMS PCB Board

3S 11.1V 12V 12.6V Li-ion 18650 Battery BMS PCB Board Description

1、Three series of lithium battery protection board 2、Automatically cancel protection after protection conditions restore 3、With function of overcharge protection, over discharge protection, short circuit protection, over-current protection 4、Suitable for lithium battery pack of 11.1V, 12V, 12.6V 5、Quiescent current 30uA, so power consumption is small
Features:
Three series of lithium battery protection board.
Automatically cancel protection after protection conditions restore.
With function of overcharge protection, over discharge protection, short circuit protection, over-current protection.
Suitable for lithium battery pack of 11.1V, 12V, 12.6V.
Fine workmanship and durable.
Quiescent current 30uA, so power consumption is small.
Specifications:
Model: 1#:HX-3S-01, 2#:HX-3S-FL10-A
Size:
#1: 50 * 16 * 1.0mm/1.97 * 0.63 * 0.04inch
#2: 53 * 17 * 4.0mm/2.09 * 0.67 * 0.16inch
Maximum operating current: 6-8A
Maximum transient current: #1: 9-10A, #2:10-13A
Quiescent current: 30uA
Internal resistance: 100mΩ
Working temperature: -40~+50
Storage condition: -40~ +80
Effective life: >30000h
Short circuit protection: Yes, delayed self recovery
The component included:
#1: 1 pcs S-8254AA protection chip, 4 pcs AO4407
#2: 1 pcs 2110-cb protection chip, 2 pcs AOD472
Notes:
1. Higher than 3A current discharge product, the discharge rate of battery discharge is above 3C.
2.Multiplier calculation formula: 1C battery, 2000 capacity is equal to 2AH * 1 = 2A maximum working current.
3C ratio battery, 2000 capacity is equal to 2AH * 3 = 6Amaximumworking current.
3.In the process of use, if the battery heat, the battery power is
not applicable. This situation cannot be used for a long time.Otherwise, the
battery will soon be damaged.
Package Included:
1 x PCB Protection Board(have assembled)