433MHz Garage Sliding Door Gate Opener Controller Remote Control Wireless , Rolling Code Support

433MHz Garage Sliding Door Gate Opener Controller Remote Control Wireless , Rolling Code Support Description

YET863PC-V2 motor controller, the wireless receiver, has the characteristics of stable performance, low power consumption, and is easy to use. It does not require the use of traditional jumper wires or DIP switches for coding. It only needs to let the receiving controller receive and store the wireless signal transmitted by the remote control, and it can be used in conjunction with the controller.
Working voltage: AC220V
Working temperature: -40 - +80
Receiving sensitivity: -105dBm

Working frequency: 433.92MHz
Remote control type: rolling code
Working mode
1. Press the controller button, the controller controls the motor to rotate forward, and the motor works for to 2 minutes.
2. Press the controller down button, the controller controls the motor to rotate reversely, and the motor works for to 2 minutes.
3. Press the learned remote control stop button, the controller stops working.
4. Press the learned remote control button, the controller controls the motor to rotate forward, and the motor works for to 2 minutes.
5. Press the learned remote control down button, the controller controls the motor to rotate reversely, and the motor works for to 2 minutes.
6. Press the learned remote control stop/unlock button, the controller stops working.
7. Press the learned remote control lock button, the controller stops working and locks. At this , the manual override the remote control and the control panel cannot be controlled, and can only be controlled again after unlocking with the remote control.
8. When the controller is in working state, the status indicator flashes at a frequency of 0.5S.
Colour:White & Black
Material:plastic
Due to different product batches, the appearance may vary, which does not affect the use

Package Contents:
1 x Cont