5 in 1 pH Temperature EC TDS Tester PH Meter

5 in 1 pH Temperature EC TDS Tester PH Meter Description

【High-Precision TDS Meter and Reliable Soil Tester】Our soil pH tester measures pH with an accuracy of 0.01. The digital pH meter's 3-point calibration and 0-14 measurement range ensure accurate testing results. The high-precision algorithm chip and electrode of our digital water pH tester ensure precise and fast response.

【Water pH Meter to Improve Quality of Life】The pH TDS tester allows you to determine water quality. The titanium alloy probe is perfect for daily drinking water needs. The digital TDS meter enables quick and accurate water quality testing with 5 different functions: salinity, TDS, EC, pH, and temperature are perfectly combined in one meter. Also suitable for plants and aquaculture animals.

【Digital pH Meter with Automatic Calibration Compensation】 This pH test pen with a highly sensitive glass probe offers a comprehensive measuring range and is easy to calibrate to ensure the accuracy of your measurements. You no longer need to worry about the temperature of the test liquid.

【4-in-1 pH Meter】 The pH meter has 5-in-1 functions for measuring pH, TDS, EC, salinity, and temperature. This digital pH tester meets all your testing needs. It not only tests drinking water quality, but also monitors the quality of swimming pools, measures pH, and is suitable for aquariums, spas, whirlpools, hydroponics, and fish tanks, etc. Get healthy, pure drinking water or other domestic water now with this 5-in-1 pH tester!

OPERATION
Carefully twist the protective cover to open it.
Turn on the meter with the "ON/OFF" button.
Immerse the measuring electrode into the test solution (the immersion depth must not exceed the immersion line).
Stir gently and wait until the reading stabilizes.
To measure the temperature, please long press the "HOLD/TEMP" button to recall the reading.
Then clean the electrode with distilled water and turn off the meter with the "ON/OFF" button.
After use, carefully twist the protective cap and put it back on. put it on.

CAUTION
If you calibrate the meter in air or with the wrong calibration solution, "ERR" will flash on the display.
When the meter is turned on, the measured value will jump up and down. This is normal.
The product has a modular design. If the probe is damaged, you can purchase a new one.
Please recalibrate the device after replacing the probe.
Always replace the protective cap after using the digital meter to prevent the electrode from drying out due to prolonged exposure to air, which could cause moisture or unstable readings.
If the electrode is dry, immerse it in distilled water for a few hours.
If the date is abnormal, press the HOLD and MODE buttons simultaneously for 3 seconds to reset it.