(5 Litres) Residue Remover - For use prior to sealing

(5 Litres) Residue Remover - For use prior to sealing Description

Residue Remover is a powerful ecological cleaner that unlike other acid/alkaline cleaners, does not require any neutralisation process before application.

It is specially formulated to remove surface residue and contamination from natural stone paving and other surfaces where "sweep-in" compounds may have been used.

** Disclaimer- product is designed to remove the invisible resin film left by a sweep-in jointing compound prior to sealing - NOT VISIBLE STAINS left between the joints.

Application:

• Use neat or diluted to a 1:5 ratio depending on amount of residue present
• Apply with either a brush or garden sprayer
• Leave the product to penetrate and break down the surface residue (5 - 60 minutes)
• Agitate with a stiff brush and wash off with a pressure washer
• Re-apply if surface residue remains after first application
• Average coverage 6 - 8 m² per litre

Health & Safety:

Non-flammable. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep container tightly closed and in a well-ventilated place. Wear suitable protective clothing and gloves.