5kg PLUG-IT Cement Based Rapid Setting Cracks Leak Joint Plug Tub

Description:
A cement based rapid setting compound for running water leaks, prior to the application of Bond It TANKING
SLURRY.

Benefits:
w Seals and fills cracks and joints.
w Plugs running water leaks.
w Can be used to anchor fixings.

Uses
A rapid setting watertight barrier, suitable for use
with clean fresh water. Cures in less than 2
minutes. Can be used as a seal for joints prior to
over coating with Bond It TANKING SLURRY.
Preparation Of Substrate
Cut out the holes or cracks to a square (not a v) shape of 20mm.
Ensure all loose particles are removed. Dampen the surfaces first
with clean water.

Application
In a suitable clean container place only as much material that can
be used within 2 minutes or that fits into one palm. Add 20%
clean water: 1 part water to 4 parts powder. Mix quickly by hand
and thoroughly ensure even colour. Whilst the mixture is still
warm, and within 2 minutes of adding the water, with a gloved
hand or trowel put the mixture in place, press hard and hold for at
least 30 seconds to 1 minute or until the plug is set. Trim flush if
required after water has stopped running. Wash tools immediately
in clean water.

Cleaning Of Tools
Clean tools with hot soapy water if product has not dried. Once
cured use Bond It CEM-KLENE to remove hardened material.

Limitations
For holes greater than 20mm, repair in patches working towards
the middle. Once set PLUG-IT cannot be re-activated and re-used.

Container Size
5Kg plastic tub.

Colour
Grey powder.

Shelf Life
5 years from date of manufacture, when stored in unopened
original packaging.

Storage Conditions
Store in original unopened tubs in a cool, dry place between 5-
25°C.

Disposal of Containers
Do not leave empty containers where residue could be harmful to
children, animals or the environment. Remove any containers to a
central disposal point in accordance with local regulations.

Health & Safety
Please refer to separate material safety data sheet for full
handling, use and storage instructions. Keep out of reach of
children. It is the users responsibility to determine suitability for
use. If in doubt contact our Technical Department for advice.
Note: this information is for general guidance only, since site conditions
and labour are beyond our control. It is recommended that users make
their own tests to determine suitability.

Specification Summary
Appearance Grey
Form Powder
Composition Cement Plus Additives
Pot Life 2 minutes at 23°C, shorter at higher temperatures

Product Details:
Colour: Grey
Colour: BDH106
Size: 5Kg
Barcode: 5060021369758

Package Content:
Bond It 5kg PLUG-IT Cement Based Rapid Setting Plug Tub Bucket Cracks Water Leaks Joints

•  1. Any Confuse Or Dissatisfied About Our Products Please Contact Us. Please Do Not Leave Casual Neutral/Negative Feedback.
•  2. Free Postage To UK Mainland, Postage To Any Other Islands & Northern Islands Charges Apply
•  3. Please allow 1-3mm error due to manual measurement.
•  4. Due to the light and screen setting difference, the item's color may be slightly different from the pictures
•  5. We will carefully test every item before shipment. The quality is guaranteed!