5L Green Hammer Finish Metal Paint Hammered Coating From Bitec

5L Green Hammer Finish Metal Paint Hammered Coating From Bitec Description

Hammer Finish Paint is a fast air drying special effect metallic finish for application by spray, often applied directly to metal. For exterior use, application over over an anti-corrosive primer is recommended.

Typical uses are for machinary, plant, sheet metal, general fabrication work whenever an aesthetic appearance is required with a minimum of surface preparation or when there is need to cover up, or masks surface irregularities, withour first filling and flatting.SuppliedColour:

Green

Volume:

5 Litre Can

Technical:

Fast drying special effect metallic finish for metals

Railings

Ironwork

Machinery

Plant

Sheet Metal

Trailers

etc
Surfaces should be dry, sound and free from dirt, dust, rust and grease

Touch dry after 30 mins @ 20°C

(Colour shown is a guide only and may vary slightly to actual product)

Application Details:Airless Spray:

Not Suitable

Conventional Spray:

HVLP Spray is most suitable, 5 to 10% thinners may be added to suit equipment
Apply 1 mist coat, allow 20 minutes to flash off, then apply 1 full wet coat

Brush: *Best results achieved by spraying.

Brushing is only suitable for small area
Apply 1 generous coat, spread quickly within minimul brush strokes and leave it, do not layer off and wait for hammer pattern to develope.

Roller:

Not Recommended

Thinners:

Industrial Thinner