(5M) USB3.0 Printing Cable A Male/B Male Copier Mobile Hard Disk Connection Data Cable

(5M) USB3.0 Printing Cable A Male/B Male Copier Mobile Hard Disk Connection Data Cable Description

Features:

1. Plug nickel-plated contacts have strong conductivity, can effectively reduce data transmission loss, to avoid generating false signals;

2. The two main signal lines plus independent shielding structure to reduce interference and ensure high-speed data transmission;

3. The outer layer of the wire is fully shielded with aluminum foil and high-density braided mesh, and both ends of the wire to join the special RF cutoff, effectively isolate the EMI/RFI electromagnetic interference, so as to ensure that in different working environments to play its transmission effect.

4. The maximum transmission bandwidth of USB3.0 is up to 5.0Gbps (500MB/s).

5. Please note that the bandwidth of 5Gb / s is not 5Gb / s divided by 8 to get 640MB / s but with SATA the same 10 Bit transmission mode (on the basis of USB2.0 added a pair of error correction code), so its full speed is only 500MB / s. The USB3.0 maximum transmission bandwidth of up to 5.0Gbps (500MB / s).

6.USB3.0 is not common with USB2.0 interface.

Specification:

Product Name: USB3.0 AM-BM Print Cable

Core material: Full copper

Product cover: High-quality PVC cover, with good tensile, bending, compression and impact resistance ability

About shielding: double shielding (braided shielding + aluminum foil shielding), can greatly reduce electromagnetic interference and radio interference, stable data transmission

Product function: data transmission

OD wire diameter: 5.5MM

Core Size: 26/30AWG

Length (optional): 0.5M, 1M, 1.5M,  3M, 5M

Use: With USB male to 3.0 print interface between the device data transmission, connection. (Note: USB3.0 and USB2.0 interface is not common)

Package Included:

1*USB 3.0 print cable