7 in 1 Water Quality Tester PH/ORP/EC/S.G/TDS LCD Backlight Test Pen

7 in 1 Water Quality Tester PH/ORP/EC/S.G/TDS LCD Backlight Test Pen Description

C-600 is a multifunctional water quality tester with 7 functions product that can be used multiple times. It can measure pH, conductivity, ORP, temperature (C/F), TDS and salinity within one meter. the measurement range is and wide, and can measure water salinity and sea salt. It is suitable for digital water quality monitor , swimming pool, drinking water and aquarium. Measurements are accurately displayed in a , easy-to-read and clear LCD.
Calibration Conductivity EC: Support 3-point calibration automatic identification (1413us 12.88ms and .8ms) through 3 calibration points (1413uS/cm 12.88mS/CM .8mS/CM) pH: 1 point (6.86) or 2 points (6.86 4.00 )) (6.86 9.18) or 3 points (6.86 4.00 9.18) can automatically identify the calibration solution
Sea salt: the salinity of sea water is the ratio of total dissolved solids to the weight of sea salt in sea water, usually expressed in grams per kilogram of sea water. (Measurement range 10.1-200.0 ppt)
The power consumption is 2.9 mA, and the power consumption is 0. the accuracy within 150ppt is relatively accurate, and the deviation higher than 160ppt is relatively . Automatic shutdown: 5 minutes
EC measurement range: 0 to 10000uS/cm 10.01-19.99ms 20.1-400mS/CM

Product parameters:
Product name: 7-in-1 water quality testing pen
Measurement range: PH/ORP/EC/TEMP/SALT/S.G/TDS
Resolution: 1 uS/cm; 0.1 /cm;
Accuracy: 2% of reading
TDS measurement range: 0 to 1000ppm 1000ppm to 10000ppm 10.1 to 200.0ppt
Resolution: 1ppm; 0.1 point
Accuracy: 2% of reading
Salinity measurement range: 0.00 to 25.00%
Resolution: 0.01%
Accuracy: 0.01-5.00% (0.1%) 5.10-25.00% (1%)
PH measurement range: 0.01-14.00pH
Resolution: 0.01pH
Accuracy: 0.05pH
ORP Negative Potential 1999MV
S.G seawater specific gravity 1.000-1.222
Operating environment: 0 to 60.0C (32.0-140F); relative humidity 100%
TDS coefficient: 0.4 to 1.0
Temperature range: 0.1-60.0C 32.0-140F
Temperature Accuracy: 0.5C
Temperature Resolution: 0.1C/F
Power Supply: 3 x 1.5V button batteries (included)
Display size: 33 x 24mm
Dimensions: 183 x 37 x 37mm (7.2 x 1.5 x 1.5 inch)
Weight: 160 grams
Material: ABS
colour: green+white

Package Contents:
1 x Water quality tester
1 x english manual

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.