(76cm, 2m) Mirror Silver Solar Control Privacy One Way Window Film

(76cm, 2m) Mirror Silver Solar Control Privacy One Way Window Film Description

This listing is for Reflective One Way Mirror Glass Window Film Roll. All our window films are self-adhesive film, you can use them internally for your home, cars, shops, offices and building windows. The film is reflective, which allows viewing on one side, reducing the sun's glare and the solar rays, acting as a mirror effect. The film will give you privacy during the daytime as it works on the reflection theory of light. The film is straightforward to install.  Please Note:- The film works by reflecting the brighter side so is great for external facing glazing where the sunlight is usually always brighter than the artificial light but doesn't always work correctly at night time or on internal partitioning. The side that you want to be able to see through to needs to be at least 4:1 brighter than the room you don't want people to be able to see into. All reflective films work in this way, and no film does not work in this way.

Full fitting instructions are supplied with your order.

Professional quality - as used by professional window film fitting companies. 
Non Fade, Easy DIY install.
Self Adhesive Film 
Easy to cut & trim to size 
Allows one-way viewing in correct lighting conditions

Reduces solar heat, glare and UV by over 80%.

FITTING INSTRUCTIONS

Tools needed can be purchased from us:

- knife
- Spray bottle containing water with a few drops of washing up liquid ‘Slip Solution'
- Squeegee

Method:

1) Thoroughly clean the window the film will be applied to.
2) Cut your film to the size of the window, adding an extra 2cm to the width and height.
3) Remove the clear lining film from the back of the window film and spray the adhesive back of the film, as well as your fingers, with the Slip Solution. Attach a piece of sticky tape to either side of the film at one corner and peel them apart.
4) Spray the glass with the Slip Solution.
5) Apply the adhesive side of the film onto the glass and slide into position.
6) Spray the face of the film with the Slip Solution and using a squeegee, push out all the soapy water from behind the film
7) Trim off any excess film using the knife