900M-T-LI soldering tips with 0.8mm tip diameter, 5 pieces

900M-T-LI soldering tips with 0.8mm tip diameter, 5 pieces Description

Product Name: Soldering Iron Tip
Overall Length: 51mm/2"; Tip Length: 25mm/0.97"
Shank Diameter: 6.5mm/0.25"
Inner Diameter of Hole: 4mm/0.157"
Tip Diameter: 0.8mm/0.031"
Model: 900M-T-LI
Design: Point Tip
Material: Metal
Color: Silver Tone
Weight: 28g
① It features a long service life and low oxidation tendency, and is easy to install and use.
2. A good replacement tip for your standard soldering iron.
Note:
To maintain the performance of the soldering iron tip, a simple maintenance procedure is recommended:
1. Operate at the lowest possible temperature (200 degrees Celsius (427 degrees Fahrenheit) or lower). Excessive heat can damage the soldering iron tip. Operating temperature is one of the main causes of solder delamination.
2. To clean the tip: Use only (sulfur-free) pure cellulose sponges; damp on the surface.
3. Regularly add resin-core solder of appropriate diameter to the working end of the tip.
Package Contents:
5 x Soldering Iron Tips
3. Only the above package contents are included; other products are not included.
4. Note: Lighting conditions and different screens may cause the color of the item in the picture to be slightly different from the real color. The allowable measurement error is +/- 1-3cm.