Adjustable Height Coilovers for Alfa Romeo 147 937 00-10 Coilover Springs Set

Adjustable Height Coilovers for Alfa Romeo 147 937 00-10 Coilover Springs Set Description

maXpeedingrods B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.

Application:

For Alfa Romeo 147 (937) 2000-2010

For Alfa Romeo 156 (932) 1997-2007

Specification:

Front Lowering: 35-50mm (depends on the vehicle models)

Rear Lowering: 35-50mm (depends on the vehicle models)

Top mounts: Front and rear OE top mounts required

Spring rate Front: 8 kg/mm (448 lbs/in)

Spring rate Rear: 7.5 kg/mm (420 lbs/in)

Front spring inner diameter: 62-88 mm

Rear spring inner diameter: 62-73 mm

Spring length Front: 176 mm

Spring length Rear: 240 mm

Helper spring rate Front: 1 kg/mm (56 lbs/in)

Helper spring length Front: 102 mm

Spring Preload advised: 7-10 mm

Package included:

2x Front coil-overs

2x Rear coil-overs

2x C spanners

Feature:

1. Lower height adjustable (depends on vehicle models)

2. Dust boot, solid rubber bump stops

3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets

4. Simple install, Easy to adjust.

5. Use the vehicle's original upper mounts (not included in our product kit).

Note:

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.

2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.

3. Impact wrench is prohibited during the installation, it will loosen or damage the product.

4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)

5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.