Adjustable Suction Cup Stone Seam Setter for Pulling and Aligning Tiles Flat Surfaces Stone Seam Setter Building Tools

Adjustable Suction Cup Stone Seam Setter for Pulling and Aligning Tiles Flat Surfaces Stone Seam Setter Building Tools Description

Product Description:

Vacuum double-head double-layer suction cup, glass brick lifter, thickened suction cup, seam regulator, height regulator, marble hand pump lifter

After the board sucks the working surface, adjust the board seam at a stable speed.

If the working surface is very large, two dividers must be used to join together at the same time. If you cannot operate the vacuum cleaner at the same time, you must fine-tune each device to prevent the suction cup and the work surface from moving sideways at the same time.

When connecting small boards together, make sure they are on a level surface and do not block each other.

easy to use:

1: Adjust the position of the suction cup on the table, ready to squeeze the hand pump

2: Rotating pitch adjustment knob can be adjusted up to 50mm

3: Press the hand pump continuously until the suction cup is adsorbed on the table

4: Rotating height adjustment knob can be adjusted up to 30mm

Specification:

Aluminum suction cup

40cm in diameter

130kg horizontal suction

120kg oblique suction.

Packing weight: 1800 grams Packing size: 40*13.8*12.5cm carton packaging

 Application: suitable for marble, granite, floor slab, mirror, plastic, glass or some flat holes that need to be adjusted

Package Included:

1 * Suction cup

2* Press buckle (gift)

Note: 

For large bricks above 1.8M, it is recommended to use two spacing adjusters of this model, which can be fixed for 24 hours