Ancel BST100 12V汽车蓄电池测试仪 220Ah

Ancel BST100 12V汽车蓄电池测试仪 220Ah Description

Product Ancel BST100 battery tester is used for lead-acid starter batteries, along with checking the following battery conditions, starting, charging and loading. With good design, easy operation, accurate reading, complete functions, this tester provides readings via a large LCD and tips with sound and light when testing. It uses the 4-wire Kelvin method to complete the collection of a series of complicated data to calculate each test data with built-in precise circuit and improved digital processor. In addition, some circuit improvements including polarity protection, overvoltage protection, loose wire detection ensure safety and convenience during testing. So this is the best tool in the fields of battery sales, vehicle repair and battery inspection in equipment systems associated with lead-acid starter batteries. ANCEL BST100 Function: 1.Identify battery status Good or Replace 2.Check battery capacity - Cold cranking current (CCA), DIN, EN and IEC information relative to the battery marking. 3.Check internal resistance value (Ohm) 4.Show battery life in percent (%) 5.Battery start test, load test 6.Battery charge test, Ripple Test 7.Support battery ripple test and review test data BST100 12V Battery Tester Features: 1.Fast and smooth running speed with STM-32 chip set hardware 2.Accurate test results, using high precision amplifier and calibrated by professional battery test tool, BST100 reading accuracy up to 99%. 3.Wide test range covers from CCA 100-2000, 3-220 AH, best in the market. 4.Industry initiative graphical battery voltage real-time monitoring, can analyze battery data more accurately. 5.Unique battery result display in percent and meter mode. 6.Test all vehicle starting lead-acid batteries, including regular lead-acid batteries, AGM flat batteries, AGM spiral batteries and Gel batteries, etc. 7.Polarity reverse connection protection, reverse connection will not damage the tester or affect the vehicle and battery. 8.Test the battery directly with power loss, no need to fully charge before testing. 9.Test standards currently include the world's majority of battery standards, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB. 10.BST100 is used to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL EPB cell BST100 Support Languages: English, French, German, Russian, Spanish, Italian