Auto Car Brake Fluid Oil Change Replacement Tool

Auto Car Brake Fluid Oil Change Replacement Tool Description

Auto Car Brake Fluid Oil Change Replacement Tool Automotive Pump Oil Bleeder Empty Drain Kit



1、Different from the traditional tiring and boring oil replacing method. 2、Easy to operate, one person can finish brake fluid replacing work. 3、Highly flexible transparent hose can be docked with a variety of brake cylinder emptying screws, acid and alkali corrosion resistance. 4、Clean and environmentally friendly, without dirty oil stained on the floor. 5、Suitable for cars, trucks and engineering vehicle.(A small number of the model can be slow to draw the emptying screws)



Description: This product is a new set of oil replacement tool to replace brake fluid/oil in main pump or sub pump of cars, which usually requires two people to work together: one person steps on the brake and another person collects the waste oil. It is a time-consuming and exhausting process. Besides, if two people did not coordinate well, the one off the car may get dirty oil stained on the floor. This tool solves these problems perfectly. With the help of our tool, one person can finish the replacing work without dirty oil stained on the floor. Features: Different from the traditional tiring and boring oil replacing method. Easy to operate, one person can finish brake fluid replacing work. Highly flexible transparent hose can be docked with a variety of brake cylinder emptying screws, acid and alkali corrosion resistance. Clean and environmentally friendly, without dirty oil stained on the floor. Suitable for cars, trucks and engineering vehicle.(A small number of the model can be slow to draw the emptying screws) Specification: Name: Emptying Material: Metal + plastic Color: White Product tube length: 80CM Product work pressure: 8 kg(appr.) Product capacity: nearly half a liter Size: 24.5 x 13cm /9.65 x 5.12"(appr.) How to use: 1.Take away the dirty brake fluid from the tank; 2.Put in the new fluid back; 3.Start the car and connect the hose between the equipment and the brake branch pump; 4.Twist the screw to be loose, but not completely. Then open valve to start siphoning the fluid out.Please turn off the valve after screwing when it finish. 5.Our tool fit for universal cars, you can use the tapered spout which is offered in the package avoid air leaking; 6.Please lift the tool over the brake pump to ensure it work properly. Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item.



1 x Oilcan 1 x Oil Tube 1 x Joint 2 x Nozzle