AVIGNON 3D epoxy tile stickers (25.4cm x 25.4cm)

AVIGNON 3D epoxy tile stickers (25.4cm x 25.4cm) Description

Application

Make sure the surface is smooth, solid, dry and thoroughly clean before applying.  Apply at room temperature 70ºF.  The sheets overlap each other to avoid water/dirt from entering any gaps.  The stickers can be cut around sockets very easily with scissors.  Seal any edges and joins using clear silicone sealant if using in wet areas.  Leave to dry for 24 hours before cleaning at room temperature.  Don't forget to remove the protective clear film on the front of the sheet!

Surfaces

Apply to smooth flat ceramic tiles, painted walls, hardboard, plywood, shower walls (if edges are sealed).  Avoid uneven surfaces or unfinished walls eg. raised tiles or stone, wood panelling, bare plaster and damp walls that are untreated.  If your walls are freshly painted, wait 3 weeks before applying.

Removal

Use a hairdryer to soften the adhesive, pull back a corner and remove.

Easy Care

Wipe clean with a regular household cleaner.

Peace of mind

Product is well protected and delivered in a strong box or jiffy bag to avoid damage during transit.