BIOMASER Transfer Stencil Machine Professional Printer Machine Drawing Thermal Stencil Maker Copier For DIY, No Ink Need

BIOMASER Transfer Stencil Machine Professional Printer Machine Drawing Thermal Stencil Maker Copier For DIY, No Ink Need Description

About this item

• Own factory, thermal copier, stencil maker, professional transfer machine, no ink required. It has fast transfer printing speed, traditional design ,low noise and more stable performance.
• Please do not use too dark a pattern or have a lot of shadow in the image, otherwise it will get stuck. Simple patterns and lines can achieve the best effect. To achieve a better transfer effect, the device should rest for a few minutes after transferring 1-2 sheets.
• Professional thermal copier, easy to use. No adjustment required, time-saving. NOTICE : Please press the cable into the hole hardly, otherwise the connection will be loose.
• Adjustable photo or fine resolution. Mirror copy and normal copy with overheating warning. You can choose between mirrors, photo and two depth settings (I and II) to fit your document header.
• Brand service: Biomaser brand has been engaged in semi permanent and tattoo equipment industry for more than 20 years and has its own factory. We have been committed to providing customers with excellcent products, if you have suggestions or dissatisfaction with our products, please contact us, we will give you the best solution.

Copy in Mirror State:

1, Open the copying paper cover.

2, Drawout the oilpaper; according to the picture, put the paper in and keep stencil paper up, pull the paper to the TPH side. Also, you can tear off the yellow paper and then put the paper.

3, Close the copying paper box.

4, Copied document should be faced down and put it into the feeder. When the document is catched, please press the key "COPY".

Copy in Normal State

Before copying, press key "MIRROR" to keep the mirror light quenching.

1. Open the copying paper box.

2. Drawout the oilpaper; according to the picture, put the paper in and keep stencil paper down, pull the paper to the TPH side. Also,you can tear off the yellow paper and then put the paper.

3. Copied document should be faced down and put it into the feeder. When the document is catched, please press the key "COPY".

Notice: 1. Before usiing the mirror copy function, you should wait a few seconds for TPH heating; when the page is printed, the white paper of the copying paper should be stuck to TPH. 2. If you want to stop the copying mission, please press the key "STOP". 3. If the warning signal sounds, ERROR lights works and stop c opying immedistely.

4 .The tattoo thermal copier is NOT suitable for the patterns with complex shadows

.