Bond It A43 Threadlock - Blue 25ml

Bond It A43 Threadlock - Blue 25ml Description

A medium viscosity, medium strength, screw and threadlocker. Capable of bonding “As Received” parts covered with a light film of oil. Non‐drip consistency for clean, economic application.

Uses 

Bond It A43 THREADLOCK can be used as a locking compound for direct application to lightly oiled components, thus reducing the need for pre-treatment. Also suitable as a standard anaerobic threadlocker for fine to medium pitch threads. 

Preparation 

Remove heavy oil and grease contamination. Best results are obtained on clean parts. 

Application 

Apply sufficient adhesive to coat the threads. The adhesive will start to cure on exclusion of air from the bonding system. Observe handling and strength times stated below. 

Bonding Time 

Assuming room temperature is +20o C. - Handling: < 15 minutes. - Full strength: 24 hours. 

Limitations 

A43 THREADLOCK is designed for metal bonding. Users should satisfy themselves as to the products efficacy when used in conjunction with engineering rubbers and plastics. Not recommended for use with accelerators. The strength of the Threadlock bond will be substantially lower on Stainless Steel. On certain grades it may not work at all without the use of an activator. It is the user's responsibility to check suitability of this product with their particular application. 

Colour THREADLOCK is blue in colour.

Container Size 25ml

Shelf Life Minimum shelf life 12 months from date of manufacture when stored at 20o C in unopened bottles.