Bond It Cement Based Water & Mould Resistant Wall Tile Grout White 3kg

Description:
A cement‐based, polymer modified joint filling compound for tile joints up to 3mm wide around all types of
ceramic wall tiles. Can be used in interior and exterior applications. Conforms to BS EN 13888:2002 Type CG
Class 1

Uses
WALL TILE GROUT is formulated to provide a non-slump, readily
compactable grouting slurry, which can be easily applied across all
types of ceramic tiled surfaces. WALL TILE GROUT will dry to a
hard, durable, water resistant finish, suitable for interior and
exterior applications. In fully immersed locations, the inclusion of
an acrylic latex additive in the grout mix can enhance water
repellent properties. Quick and easy to apply, providing a smooth
joint which is unaffected by water or weather.

Preparation
Check that all the tiles are securely fixed and that the tile adhesive
has thoroughly dried before applying any load or pressure to the
tiled surface. Ensure all joints are raked clear of any excess
adhesive residues to allow an even and consistent depth of grout
to be applied in all areas.

Mixing
WALL TILE GROUT powder should be added to water in a clean
container and mixed to a smooth, creamy, lump-free consistency,
preferably with a mechanical mixer.(Approximately 350ml of water
to 1Kg of powder). Allow to stand for 5 minutes, re-mix briefy, and
use within 1 hour.
Part-used grout should never be “freshened up” by adding more
water, discard any grout once it appears to lose workability
(normally after 1 hour).
Tiling applied to wood based surfaces, where slight movement is
likely, should be grouted with WALL TILE GROUT mixed with an
acrylic latex additive diluted 1:1 with water to improve flexural
adhesion strength.

Application
Use a rubber squeegee to work the grout thoroughly and
consistently into the tile joints, removing the excess as work
proceeds across the tiled area. Fine grout residues can be washed
away with a lightly dampened cloth or sponge up to 2 hours after
application, with a final clean finish being achieved using a dry
cloth to polish the surface when the joints have dried and
hardened by the next day.

Open Time
Open time of the exposed adhesive bed is approx. 20 minutes,
dependant on conditions.

Drying Time
Final set will occur between 12-24 hours.

Cleaning
Tools should be washed with water immediately after use.

Coverage
Approximately 1Kg of wall tile grout will grout 3m2 of 150 x 150
tiles with a 2mm joint.
Container Size
3Kg paper sacks.

Shelf Life
12 months from the date of manufacture packing shown on the
bag, when stored in unopened sacks.

Colour
White.

Storage Conditions
Store in original, unopened sacks, off the ground, in cool, dry
conditions and away from excessive draughts.

Disposal of Containers
Do not leave empty containers where residue could be harmful to
children, animals or the environment. Remove any bags or
material to a central disposal point in accordance with local
regulations.

Health & Safety
Please refer to separate material safety data sheet for full
handling, use and storage instructions. Keep out of reach of
children. It is the users responsibility to determine suitability for
use. If in doubt contact our Technical Department for advice.
Note: this information is for general guidance only, since site conditions
and labour are beyond our control. It is recommended that users make
their own tests to determine suitability.

Specification Summary
Flammability Non-flammable
Pot Life Approximately 1 hour
Drying Time 12- 24 hours (dependent on conditions)
pH @ 20oC 12-13
Solubility in Water @ 20oC >2 g/l
UFI 5M30-40P8-P00F-6HU2

Product Details:
Colour: White
Code: BDWTG4
Size: 3Kg
Barcode: 5060021368430

Package Content
Bond It Cement Based Water & Mould Resistant CG1 Rated Wall Tile Grout White 3Kg

•  1. Any Confuse Or Dissatisfied About Our Products Please Contact Us. Please Do Not Leave Casual Neutral/Negative Feedback.
•  2. Free Postage To UK Mainland, Postage To Any Other Islands & Northern Islands Charges Apply
•  3. Please allow 1-3mm error due to manual measurement.
•  4. Due to the light and screen setting difference, the item's color may be slightly different from the pictures
•  5. We will carefully test every item before shipment. The quality is guaranteed!