Bond It Mirror Pro Adhesive - White EU3

Bond It Mirror Pro Adhesive - White EU3 Description

A one part polymer based high strength adhesive which is non‐corrosive for the fixing of mirrors and glazed products.

Benefits: 

• Non‐corrosive. 
• Solvent‐free and odourless. 
• Quick curing. 
• Excellent adhesion.
• Can be applied to wet surfaces. 
• For interior use.

MIRROR PRO is a ready to use adhesive suitable for use on mirrors, glass and ceramics, which is non-corrosive and odourless. It has outstanding resistance to heat and humidity and does not require a primer.

Uses 

Suitable for internal bonding of mirrors, glazed surfaces, ceramics, enamel, metals, PVCu, polycarbonate and treated or untreated wood to most common substrates.

Application 

Ensure all surfaces are clean and free from grease, oil or any other contaminants that may hinder adhesion. Carefully cut the tip of the cartridge, taking care not to damage the threaded area. Cut off top of nozzle at an angle of approximately 45˚ to an opening of approximately 10mm. Screw on nozzle and place cartridge in a standard sealant gun. For glass thickness of 2 to 4mm apply a 10mm bead of adhesive at 100mm intervals vertically to the back of the mirror, or surface to be bonded. Place the mirror in position and apply even pressure. Provide temporary support (tape) whilst the adhesive cures. The edges of the mirror can also be sealed with MIRROR PRO if required but leave 24 hours after fixing. For glass thicknesses above 6mm, mirrors greater than 1m2 area or mirrors on ceilings or sloping walls, MIRROR PRO MUST be used in conjunction with mechanical fixings. 

Limitations 

Do not use on surfaces that bleed oils or plasticisers. Do not use in glass or thicker needs mechanical fixing. Any mirror on a sloping wall or ceiling must have mechanical fixings. Any mirror greater than 1m2 must have mechanical fixings. 

DO NOT use on safety mirrors. 

Container Size EU3 plastic cartridge. 

Colour Available in white. 

Shelf Life 12 months from date of manufacture when stored in unopened cartridges. 

Storage Conditions Store in original, unopened cartridge, in a cool, dry place at a temperature between +5o C and +25o C