Bond It One Hit Wonder Lightweight Filler - White 1L

Bond It One Hit Wonder Lightweight Filler - White 1L Description

A specially formulated compound consisting of millions of tiny glass bubbles that will fill most holes and gaps in a single application. Gives a super smooth, brilliant white finish that does not require sanding.

Uses 

Bond It ONE HIT WONDER is suitable for use internally and externally, on uneven surfaces for delicate repair work and in areas which are difficult or awkward to fill e.g. ceilings. Effective for filling large holes in a single application as it is non-slumping and shrink resistant, which reduces the need to build up of layers of fillers. This ready to use paste is suitable for use on plaster, concrete, brick, wood and stone.

Preparation 

Surfaces are clean, dry and free from any other contaminants that may hinder adhesion. To prevent rusting, any nail and screw heads must be covered with an oil-based primer prior to application.

Application 

It is recommend to mix this product before use. If mix is too dry add a small amount of water and re-stir. Apply directly into the hole/gap, ensuring it is completely filled. Smooth the surface with a wetted pallet knife. Remove any excess material and allow to dry for at least 15 minutes (dependant on ambient temperature and gap size and depth.) Once dry, the filler can be sanded to give a smooth and even surface, if required. Where deep gaps have been filled the surface will dry in 15 minutes, however, care must be taken not to disturb the unset filler below the surface if over painting, etc. For outdoor applications, the gaps should be sealed with an oil based paint. (When using oil based paints leave filler to dry for 12 hours). Deep applications will have extended drying times. After use replace the plastic film and ensure lid is securely fixed in place. Wash any tools in warm soapy water. Limitations Do not use in temperatures below +5o C or externally when rain is imminent. This product is not suitable for use in areas subject to continuous water immersion.

Container Size 1L plastic tub 

Colour White paste. 

Shelf Life 12 months from date of manufacture when stored in original unopened tubs. 

Storage Conditions Store in a cool, dry conditions and protect from frost.